Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DRIVE OF FARMING MACHINES<br />
E357<br />
REPLACEABLE TERMINALS OF THE<br />
REAR OUTPUT SHAFT<br />
The tractor is equipped standardly with a<br />
terminal having 6 splines.<br />
The tractor may also be equipped upon<br />
request with a replaceable output shaft<br />
terminal having 6 or 21 splines.<br />
Replacement procedure:<br />
1. Using circlip tongs remove the circlip<br />
(1)<br />
2. Pull out the replaceable terminal (2)<br />
in direction of the arrow.<br />
3. Perform installation of a new terminal<br />
in reverse order and pay special<br />
attention to installation of the circlip<br />
(1).<br />
Replacement of the terminal shall<br />
be performed when the engine is<br />
stopped.<br />
Rpm of the output shaft and<br />
terminal type shall be chosen<br />
depending on the prescribed rpm<br />
of the coupled mechanism.<br />
Shifting 540 and 1,000 or 540E<br />
min -1 is possible regardless to the<br />
number of splines of the installed<br />
terminal.<br />
E358<br />
MAXIMUM TRANSFERRED POWER<br />
Output shaft Transferred power<br />
front<br />
1,000 min -1 60 kW*<br />
rear<br />
1000 min -1 full engine power<br />
540 min -1 full engine power<br />
540E min -1 full engine power<br />
84