You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HYDRAULIC SYSTEM<br />
96<br />
P+11N015<br />
OUTER HYDRAULIC CIRCUIT CONTROLS<br />
Outer hydraulic circuit controls are located on the right wing.<br />
lever (a) controls the lower section of distributor – quick couplers (1) and (2)<br />
lever (b) controls the central section of distributor – quick couplers (3) and (4)<br />
lever (c) controls the upper section of distributor – quick couplers (5) and (6)<br />
Quick coupler (0) is directly connected with transmission and it is supposed for recuperative oil of exterior hydraulic appliances<br />
(e.g. from rotary hydraulic engines etc.).<br />
According to the equipment of the tractor, the following combinations of control levers and quick couplers can be supplied:<br />
lever (a) – quick couplers (1) and (2)<br />
levers (a) and (b) – quick couplers (1), (2), (3) and (4)<br />
levers (a),(b) and (c) – quick couplers (1), (2), (3), (4), (5) and (6)<br />
Quick coupler (0) is supplied in any case.<br />
If the tractor is equipped with front three-point hitch, use lever (b) to control it. When the front three-point hitch is used,<br />
quick couplers cannot be connected as they are pressured together with the front three-point hitch! When you finish using<br />
the front three-point hitch and want to use the section with quick couplers 3 and 4 with connection to the front three-point<br />
hitch, raise the arms of the front three-point hitch to the transport position and move the front three-point hitch lever to the<br />
„locked“ position.