Untitled

GETTING TO KNOW THE TRACTOR
P+11NH127b
SWITCHING ON OUTPUT SHAFT
DRIVE
This drive can be switched on using
switches on the right column of the cabin.
G153
LEVER OF SHIFTING OF SPEED 540
(OR 540E) AND 1,000 RPM OF THE
REAR OUTPUT SHAFT
Shifting can be carried out when the tractor
is in standstill by pulling up or pushing
down the lever.
a - 1,000 min -1 (or 540E min -1 )
b - 540 min -1
The tractor can be equipped optionally
by 6-, 8- or 21-groove termination of the
output shaft.
Shifting of 540 and 1,000 (or
540E) min -1 is possible regardless
to the number of grooves on
the installed termination. Speed
of the output shaft and type of the
termination shall be chosen depending
on the prescribed speed
of the aggregated machine.
45