Untitled

RUNNING-IN THE TRACTOR
GENERAL PRINCIPLES FOR RUNNING-IN A NEW TRACTOR IN THE COURSE
OF FIRST 100 OPERATING HOURS
In the course of first 100 operating hours:
- do not load the engine excessively;
- avoid run with partial load of the engine;
- avoid excessive idle run time;
- check frequently level of oil in the engine (increased consumption of oil within
this period is normal);
- checks screwed joints, in particular supporting parts of the tractor;
- remedy immediately all found faults; this prevents consequent damages and/or
threats to safety of operation;
- follow also the same procedure after overhaul of the tractor
G251
G252
IN THE COURSE OF FIRST 100
OPERATING HOURS
- perform running-in in normal traffic;
- retighten nuts of front and rear wheels
including connection flange/rim by the
prescribed torques.
70