Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ADDITIONAL WEIGHTS<br />
E556<br />
PROCEDURE OF FILLING OF TYRES WITH WATER<br />
1. Lift the tractor to relieve the tyre and turn the tyre to position<br />
the tyre valve upwards (A).<br />
2. Discharge air and screw out the valve insert.<br />
3. Screw on the extension for filling with water and connect a<br />
hose of water supply.<br />
4. Fill the tyre with prescribed volume of the fluid.<br />
5. For filling of the tyre you can use a gravity tank (B) us fill the<br />
tyre under pressure (C).<br />
6. Disconnect the hose and screw ooff the water filling extension.<br />
7. Screw in the valve insert and inflate the tyre to the prescribed<br />
pressure (D).<br />
8. Then screw on a protective cap onto the valve.<br />
9. Fill up the other tyre in the same way.<br />
E557<br />
PROCEDURE OF DISCHARGE OF A FLUID FROM TYRES<br />
1. Lift the tractor to relieve the tyre and turn the tyre to position<br />
the tyre valve upwards (A).<br />
2. Discharge air and screw out the valve insert; turn the wheel<br />
to position the valve downwards.<br />
Discharging of the fluid may cause underpressure in the<br />
tyre. Therefore turn slightly the wheel from time to time<br />
to get tha valve to upper position (B)!<br />
3. Remove residues of the fluid using compressed air after<br />
screwing in the water filling extension (C).<br />
4. Blow out fluid as long as it stops flowing out from the air extension<br />
pipe.<br />
5. Screw off the water filling extension.<br />
6. Screw in the (D)<br />
7. Then screw on a protective cap onto the valve.<br />
8. Discharge fluid from the other tyre in the same way.<br />
122
Change language