You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HYDRAULIC SYSTEM<br />
P+11N016<br />
EXTERIOR REAR HYDRAULIC ARMS CONTROLS<br />
Exterior rear hydraulic arms controls are located on the rear right wing. They make it<br />
easier for the operator to conncet tools by controlling the movements of the lower<br />
drawbars of the three-point hitch from the outside. They only serve for connceting<br />
and disconnecting the tools.<br />
Img. (A)<br />
Before using exterior controls, move the power regulation lever (1) to its utmost<br />
position.<br />
Lowering hydraulic arms img. (B):<br />
Move lever (3) in the direction shown by the arrows (moving the lever is restricted<br />
with a link). By repeating this procedure, hydraulic arms are lowered in small steps.<br />
Raising hydraulic arms img. (C):<br />
Move lever (3) in the direction shown by the arrows (moving the lever is restricted<br />
with a link). By repeating this procedure, hydraulic arms are raised in small steps.<br />
If the lifting device controlled by exterior controls is loaded, movement of the<br />
lower drawbars within one step (on the exterior controls) is longer than if<br />
unloaded.<br />
P+11N012<br />
OUTER HYDRAULIC CIRCUIT<br />
It supplies pressure oil for hydraulic<br />
devices on outer drives of hydraulics<br />
ended with couplers. Coupler sockets<br />
with 12.5 mm bore are in accordance<br />
with the international recommendation of<br />
ISO.<br />
95
Change language