Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DRIVING<br />
STOPPING THE TRACTOR - HAND<br />
BRAKE<br />
Under normal conditions stop the tractor<br />
slowly. Shortly before stopping:<br />
1. Tread on the clutch pedal and brake<br />
the tractor by the foot brake.<br />
2. Move the main shifting lever to neutral<br />
position.<br />
3. With each stop secure the tractor using<br />
the hand brake against spontaneous<br />
moving off. Application of the<br />
hand brake is indicated by a light on<br />
the dashboard.<br />
G232 G233 G234<br />
STOPPING THE ENGINE<br />
After stopping the work, if the engine<br />
was fully loaded, it is necessary to ensure<br />
to let the engine cooled down.<br />
1. Before you stop the engine, reduce its<br />
speed to 800-1000 min -1 and let it<br />
running without loading for approx. 5<br />
minutes.<br />
2. Move the lever of manual regulation<br />
of fuel supply to position MIN.<br />
3. Pull out the controller of stopping of<br />
the engine (stopping device) and turn<br />
it slightly; push it back after the engine<br />
stops.<br />
4. When the engine stops, the ignition<br />
key can be turned from position "I" to<br />
"0" (only if the engine is stopped; the<br />
battery recharging indicator shall be<br />
on).<br />
67<br />
LEAVING THE TRACTOR<br />
Before you leave the tractor with safety<br />
cabin, do not forget remove the key in<br />
position “0“from the ignition box (in positions<br />
I and II the key cannot be pulled<br />
out).<br />
The tractor shall be secured<br />
against spontaneous moving off:<br />
1. Engine switched off.<br />
2. 1 st gear engaged.<br />
3. Hand brake applied.<br />
In case that the tractor is standing on a<br />
slope, its wheels shall be wedged.<br />
Lock the cabin.<br />
Note: When the engine is stopped, the<br />
front driving axle is engaged automatically.