Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DRIVING<br />
FH12N076<br />
DIESEL PARTICLE FILTER REGENERATION<br />
During the operation of a tractor, diesel particle filter is clogged by solid particles originating in engine run when burning fuel.<br />
Clogged diesel particle filter automatically regenerates the temperature of exhaust fumes with higher load of the engine.<br />
When operating the tractor with low load of the engine , e.g. with long-term operation on idle run, there is a partial clogging of diesel<br />
particle filter. This condition is signalized with the engine run by a lit red control of diesel particle filter, and followingly also by<br />
acoustic signal and on the display of displaying unit of diesel particle filter by failure code<br />
E:36<br />
If this situation occurs, increase the load of engine and continue working until red control of diesel particle filter switches off and<br />
acoustic signal does not stop.<br />
By increasing the engine load, the temperature of exhaust fumes increases and the solid particles which clog diesel particle filter<br />
burn.<br />
Depending on the temperature of exhaust fumes and the degree of diesel particle filter clogging, regeneration can take up to thirty<br />
minutes.<br />
Increased load of engine shall be work with a tractor at higher engine revolutions with connected tools, power intake via<br />
PTO shaft or outer hydraulic circuit.<br />
60
Change language