You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HITCHES<br />
UPPER PULL ROD<br />
Length of the upper pull rod (1) is adjustable.<br />
The pull rod can be connected to<br />
the tractor to one of four holes in the<br />
bracket that transfers forces from the<br />
hitched implement to the torsion rod in<br />
the cover of the hydraulics regulation.<br />
When transporting an implement<br />
it is necessary to reposition the<br />
upper pull rod to the hole “d“ to<br />
prevent overloading of the lifting<br />
hydraulics kinematic systém or<br />
fall of the hitched mechanism.<br />
P11NE456 E457 E458<br />
UPPER PULL ROD<br />
When extending the upper pull<br />
rod it is necessary to pay<br />
attention that both joints are<br />
screwed out from the pull rod<br />
pipe in the same length.<br />
SELECTION OF HOLES IN THE<br />
BRACKET<br />
Connection of the upper pull rod to some<br />
of the holes "a" to "d" of the bracket influences:<br />
- Sensitivity of hydraulics regulation (selection<br />
lever of the system in position "D"<br />
or "M"). Sensitivity is highest when the<br />
pull rod is connected to the hole "a".<br />
108