Tol-O-Matic System Compatibility - Industrial and Bearing Supplies

CABLES
SPECIFICATIONS • DIMENSIONS
SYSTEM ACCESSORIES
Cables included for interconnection between motors, drives,
and controllers are summarized below. For more specific information
regarding cables and connectors see the respective components section
of this catalog.
CONTR-
CONTROLLER OLLER/ DRIVE MOTOR
DRIVE
Tol-O-Matic Cables Cable Connectors Replacement
Code Included Length Part Number
MRS Motor Power 12" (305mm) Flying Lead –
MRBN Motor Power 24" (610mm) Flying Lead –
MRB Motor Power 24" (610mm) Flying Lead –
Encoder 18" (457mm) Flying Lead –
MRV Cables ordered as part – – –
of SSD Drive
MSD – – – –
Controller 13' (4m) J1 of SSD to Flying Lead 3600-1161
Encoder 7' (2m), 3600-1162,
SSD 13' (4m), J2 of SSD to MRV Motor 3600-1163,
or 20' (6m) or 3600-1164
Motor Power 20' (6m) MRV Motor to Flying Lead 3600-1165
RS232 7' (2m) J3 of SSD to DB9 Female 3600-1173
DMCLDC – – – –
MSS RS232 7' (2m) MSS to DB9 Female –
MSCLDC RS232 7' (2m) MSCLDC to DB9 Female –
MSC RS232 7' (2m) MSC to DB9 Female –
RS232 7' (2m) SSC to DB9 Female 3600-1172
Main/Driver Signals 3' (1m) J2 of SSC to Screw Terminals Ribbon 3600-1347,
Breakout 3600-1342
SSC I/O 3' (1m) J5 of SSC to Screw Terminals Ribbon 3600-1346,
Breakout 3600-1341
Step/Dir Signals
(only if using 3' (1m) J4 of SSC to Screw Terminals Ribbon 3600-1345,
DMCLDC or MSD Drives) Breakout 3600-1340
127