Tol-O-Matic System Compatibility - Industrial and Bearing Supplies
Tol-O-Matic System Compatibility - Industrial and Bearing Supplies
Tol-O-Matic System Compatibility - Industrial and Bearing Supplies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
General Requirements:<br />
• The motor must provide the torque <strong>and</strong> speed necessary for the<br />
actuator to meet the application requirements.<br />
• The drive must convert the local power source to the power<br />
input required by the motor.<br />
• The motor <strong>and</strong> the drive power ratings (watts) must match the<br />
peak <strong>and</strong> the RMS requirements of the application.<br />
• The controller allows inputs from the operator or supervisory system<br />
(PLC or computer) to properly control the motor <strong>and</strong> achieve<br />
the required motion profile(s).<br />
Axidyne Motion Control <strong>System</strong>s<br />
Axidyne systems include brushless servos, brushed dc servos,<br />
microsteppers, <strong>and</strong> open loop dc.<br />
• Brushless Servo <strong>System</strong><br />
▲ Extremely smooth <strong>and</strong> quiet operation<br />
▲ Good for high torques [up to 45 in-lbs. (5.08 N-m) continuous,<br />
140 in-lbs. (15.82 N-m) peak]<br />
▲ Good for high speeds, up to 6,000 RPM<br />
▲ High resolution, 4,000 counts per revolution<br />
▲ Provide torque control<br />
▲ Good for short, repetitive moves<br />
▲ Maintenance free<br />
• Brushed DC <strong>System</strong><br />
▲ Low to medium cost<br />
▲ Smooth <strong>and</strong> quiet operation<br />
▲ Good for speeds generally less than 2500 RPM<br />
▲ Good for torques up to 32 in-lbs. (3.62 N-m) continuous, 48 inlbs.<br />
(5.42 N-m) peak<br />
▲ Good for resolutions of 1,000 counts per revolution<br />
▲ Servo or open loop<br />
Easy<br />
SIZING AND SELECTION SOFTWARE<br />
<strong>Tol</strong>-O-<strong>Matic</strong> is your one source solution! Complete<br />
electric motion solutions from <strong>Tol</strong>-O-<strong>Matic</strong> eliminate<br />
the time <strong>and</strong> hassle of mixing, matching<br />
<strong>and</strong> integrating components. Use the<br />
Free <strong>Tol</strong>-O-Motion Sizing & Selection<br />
Software to select the exact<br />
system you need.<br />
Easier<br />
Or call your <strong>Tol</strong>-O-<strong>Matic</strong> distributor or the factory.<br />
Use our expertise to help you select the best system<br />
for your application.<br />
Easiest<br />
CONTROL SYSTEMS<br />
• Microstepping <strong>System</strong><br />
▲ Lowest cost for precise positioning<br />
▲ Highest resolution [up to 50,800 steps- rev] without feedback<br />
device<br />
▲ Good for speeds less than 2,000 RPM<br />
▲ Good for torque requirements less than 35 in-lbs. (3.95 N-m)<br />
▲ Smoothness better than full or half step, but not as good as<br />
servos<br />
▲ Good for short, repetitive moves<br />
▲ Maintenance free<br />
MOTION CONTROL SOFTWARE<br />
Set up is easy too. Controllers use the absolute<br />
easiest-to-program <strong>Tol</strong>-O-Motion Motion<br />
Control Software. Plain English comm<strong>and</strong>s<br />
mean no more difficult-toremember<br />
comm<strong>and</strong>s <strong>and</strong><br />
the shortest possible<br />
startup time.<br />
13