FLENDER Standard Couplings - DS TECH

© Siemens AG 2011
FLENDER Standard Couplings
Fluid Couplings — FLUDEX Series
FLUDEX coupling as aid to starting IEC motors
1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2
Available at short term
Available at short term
kW mm l mm mm mm kg mm mm mm mm kg
■ -0AA0-Z 24
180 M 22 48 x
110
200 L 30 55 x
110
200 L 37 55 x
110
225 M 45 55 x
110
250 M 55 60 3)
x
140
280 S 75 65 x
140
280 M 90 65 x
140
315 S 110 65 x
140
315 M 132 65 x
140
315 L 160 65 x
140
FLUDEX Type FAR (with V-belt pulley) Type FAD (with N-EUPEX D add-on coupling)
DA
297 2.5 340 SPZ
150
Delivery without oil filling: Without order code.
5 4 226 2LC0900-1AF90-0AA0-Z
L1B+W03
2.7 SPZ
150 5 5 2LC0900-1AF90-0AA0-Z
L1D+W03
2.8 SPA
190
2.9 SPA
224
4 4 2LC0900-1AF91-0AA0-Z
L1D+W03
5 4 2LC0900-1AF92-0AA0-Z
L1D+W03
3.1 SPA
224 5 5 2LC0900-1AF92-0AA0-Z
L1E+W03
395 5.3 448 SPB
236
5.6 SPB
236
7 5 363.5 2LC0900-3AF91-0AA0-Z
L1F+W03
7 6 2LC0900-3AF91-0AA0-Z
L1F+W03
5.9 SPB
236 7 7 2LC0900-3AF91-0AA0-Z
L1F+W03
6.2 SPB
236
6.8 SPB
280
Three-phase
motor
Size P M Size Oil
3000
filling
rpm
D1
x
L1
Profile,
grooves
No. of
pitch
Ø
Recommended
LG Product code Weight
with order codes for bore m
no. of
belts 1) diameters and tolerances
7 7X 2LC0900-3AF91-0AA0-Z
L1F+W03
7 7X 2LC0900-3AF92-0AA0-Z
L1F+W03
Delivery with oil filling (only above -20 °C): Product code with
“-Z” and order codes “F16” and “Y90” with plain text specification
of the oil filling quantity in liters.
Delivery with specification of oil filling quantity: Product code
with “-Z” and order code “Y90” with plain text specification of the
oil filling quantity in liters.
Axial retention is provided by a set screw and/or end washer with
a retaining screw for shaft ends to DIN 748/1 with a centering
thread to DIN 332/2.
Other methods must be specified in the order using the product
code with “-Z” and order code “Y99” with plain text specification.
(product code without -Z)
– selection in catalog
part 3
LG NL2 D3 D2 2) Product code Weight
max. with order codes for bore m
diameters and tolerances
(product code without -Z)
– selection in catalog
part 3
27 233 50 125 45 2LC0900-1AA9
L1B+M..+W03
2LC0900-1AA9
L1D+M..+W03
32 2LC0900-1AA9
L1D+M..+W03
35 2LC0900-1AA9
L1D+M..+W03
2LC0900-1AA9
L1E+M..+W03
70 299 90 225 85 2LC0900-3AA9
L1F+M..+W03
2LC0900-3AA9
L1F+M..+W03
2LC0900-3AA9
L1F+M..+W03
2LC0900-3AA9
L1F+M..+W03
83 2LC0900-3AA9
L1F+M..+W03
∅D2: •Without finished bore – Without order code M.. 1
•With finished bore – With order codes for diameter and tolerance (product code without -Z) 9
Ordering example:
Drive with motor 280 M, 90 kW at 2950 rpm with starting clutch
for connecting two shafts.
Selection:
FLUDEX FAD 395 coupling, standard type,
Hollow shaft: Bore ØD1 = 65H7 with keyway to DIN 6885/1 and
retaining screw,
Part 2: Bore ØD2 = 60H7 with keyway to DIN 6885/1 and set
screw.
Product code:
•Delivery without oil filling:
2LC0900-3AA99-0AA0-Z
L1F+M1E+W03
• Delivery with oil filling:
2LC0900-3AA99-0AA0-Z
L1F+M1E+W03+F16+Y90
plain text to Y90: 5.6 l
•Delivery with specification of oil filling quantity:
2LC0900-3AA99-0AA0-Z
L1F+M1E+W03+Y90
plain text to Y90: 5.6 l
■ -0AA0-Z
■ -0AA0-Z
■ -0AA0-Z
■ -0AA0-Z
■ -0AA0-Z 53
■ -0AA0-Z
■ -0AA0-Z
■ -0AA0-Z
■ -0AA0-Z
13
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
1)
2)
If the recommended number of belts is ..X, raw-edged belts are
required.
Larger bores on the output side are possible with type FAE.
3)
Variant with shallow keyway to DIN 6885/3.
Siemens MD 10.1 · 2011
13/15