FLENDER Standard Couplings - DS TECH

More documents

Recommendations

Info

FLENDER Standard Couplings Fluid Couplings — FLUDEX Series Technical specifications for the selection of type and size for FLUDEX fluid couplings © Siemens AG 2011 Please complete as far as possible and return to your Siemens Sales Office. 1. Intended use of coupling As starting aid For overload protection For torsional vibration isolation 2. Data for prime mover 2.1. Electric motor characteristic enclosed Power rating P 1 = ..................... kW at speed n 1 = ..................... rpm Starting: Direct Star delta Other: .................................................................................... Motor shaft: Ø ..................... x length ..................... mm 2.2. Internal combustion engine Number of cylinders: ..................... Planned max. power rating: ..................... kW at ..................... rpm Operating range min. power rating: ..................... kW at ..................... rpm Attachment via shaft Ø ..................... x length ..................... mm Attachment to flywheel SAE ....................." Motor rigidly Motor flexibly installed on foundation/base frame 3. Data for driven machine (450) 655-7447 info@pt-dstech.com www.dstech.ca 13 3.1. Type of driven machine: .................................................................................... 3.2. Required power rating P 2 : ..................... kW at n 2 = ..................... rpm 3.3. Mass moment of inertia J = ..................... kgm 2 (based on n 2 ) 3.4. Operational cycle: uniform operation non uniform operation 3.4.1. Starting frequency min.: 1 x / day 1 x / week 1 x / month Continuous operation (min. 2 months without stopping) Starting frequency max.: < 3 x in succession Number in succession: ..................... < 5 x / hour Number per hour: ..................... 3.4.2. Duty cycle per operational cycle: 60 - 100 % DC = ..................... % 3.4.3. Dimensions of the gear unit/machine shaft on the coupling side Ø ..................... x length ..................... mm 4. Ambient conditions 4.1. Place of installation: < 1000 m above sea-level ..................... m above sea-level out of doors in narrow space other: ....................................................... 4.2. Temperature of the ambient air (cooling air): min .....................°C max ..................... °C 4.3. Fitting into guard bell housing Holes: with large (well ventilated) with small (less well ventilated) without holes: with forced ventilation without forced ventilation 4.4. Environment: normally dusty extremely dusty abrasively dusty 4.5. Use in potentially explosive environment aggressive atmosphere: .................................................................................... in conformity with ATEX 95: || 2 G c T3 D160 °C || B -30 °C = T a = +50 °C / | M2 other class: .................................................................................... 5. Arrangement of coupling 5.1. horizontal at an angle (max 20°) vertical: vertical: motor overhead motor underneath 5.2 between: and: Motor Driven machine Gear unit (n 1 = ..................... rpm) Gear unit Transmission/belt drives Transmission/belt drives 1275 Newton, local 15 Boucherville, Qc, Canada, J4B 5H2 13/50 Siemens MD 10.1 · 2011
© Siemens AG 2011 Taper Clamping Bushes 14 14/2 Overview 14/2 Benefits 14/2 Application 14/3 Design 14/4 Bores in metric sizes 14/4 Selection and ordering data 14/5 Available metric bore diameters and order codes 14/5 Shallow keyway dimensions 14/6 Bores in imperial sizes (inches) 14/6 Selection and ordering data 14/7 Available imperial bore diameters (inches) and order codes 14/7 Shallow keyway dimensions (450) 655-7447 info@pt-dstech.com www.dstech.ca 1275 Newton, local 15 Boucherville, Qc, Canada, J4B 5H2 Siemens MD 10.1 · 2011
Page 1 and 2:
© Siemens AG 2011 FLENDER Standard
Page 3 and 4:
Page 5 and 6:
© Siemens AG 2011 FLENDER Coupling
Page 7 and 8:
Page 9 and 10:
© Siemens AG 2011 Technical Inform
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
© Siemens AG 2011 Coupling Presele
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
© Siemens AG 2011 1275 Newton, loc
Page 27 and 28:
© Siemens AG 2011 Torsionally Rigi
Page 29 and 30:
Page 31 and 32:
1275 Newton, local 15 Boucherville,
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
© Siemens AG 2011 Torsionally Rigi
Page 49 and 50:
■ Technical data 1275 Newton, loc
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Split intermediate spacer permits p
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
© Siemens AG 2011 Flexible Couplin
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
© Siemens AG 2011 Highly Flexible
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202: © Siemens AG 2011 FLENDER Standard
Page 203 and 204: © Siemens AG 2011 Fluid Couplings
Page 215 and 216: 1275 Newton, local 15 Boucherville,
Page 221 and 222: ■ Selection and ordering data ©
Page 251: © Siemens AG 2011 FLENDER Standard
Page 257 and 258: Available metric bore diameters in
Page 259 and 260: Available imperial bore diameters i
Page 261 and 262: Appendix © Siemens AG 2011 15 15/2
Page 265 and 266: © Siemens AG 2011 ■ Siemens Indu
Page 275 and 276: FLENDER Standard Couplings Appendix
Page 279 and 280: © Siemens AG 2011 Catalogs Industr
show all

FLENDER Standard Couplings - DS TECH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?