FLENDER Standard Couplings - DS TECH

© Siemens AG 2011
FLENDER Standard Couplings
Fluid Couplings — FLUDEX Series
Special types
1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2
Special types
Additional ordering data -Z with
order code and, if necessary with
plain text specification
Shaft and bore
Shaft insertion depth to DIN 748/1
Without addition – standard
Shaft insertion depth 1 deviating from DIN 748/1
Y28 and plain text specification
for L1
Shaft insertion depth 2 deviating from DIN 748/1
Y29 and plain text specification
for L2
Bore tolerance ISO H7 Without addition – standard 1)
Bore tolerance ISO K7 for hollow shafts with imperial bores L13/M13 1)
Bore tolerance ISO M7 for hub parts with imperial bores L14/M14 1)
Keyway to DIN 6885/1 or DIN 6885/3 keyway width JS9
Without addition – standard
Keyway to ASME B17.1, if necessary with reduced keyway depth L43/M43 1)
2 parallel keyways set 180° apart L46/M46 1)
Half parallel key balancing (before keyseating)
Without addition – standard
Full parallel key balancing (after keyseating) L52/M52 1)
Internal add-on parts
No additional internal add-on parts
Without addition – standard
With baffle plate (only for FA series)
F17
For documentation, test certificates and acceptances, see catalog section 3 2)
No test certificate, acceptance certificates
Without addition – standard
Other additions
Micro-balancing, high speed
W03
With special fixed bearings F20 3)
With additional dust seal F21 3)
Special data
Y99 and plain text specification
• This order code designates only the type price –
plain text required additionally.
13
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
1) Order code “L..” for hollow shaft side and “M..” for opposite side.
2) Surface crack and ultrasound testing are not possible on FLUDEX
couplings.
3) Fitting length on request.
Siemens MD 10.1 · 2011
13/49