FLENDER Standard Couplings - DS TECH

FLENDER Standard Couplings
Torsionally Rigid All-Steel Couplings — ARPEX ARS-6 Series
Further hubs and flanges
J hub
■ Selection and ordering data
© Siemens AG 2011
J hubs or jumbo hubs are used where the shaft diameter is greater than the maximum bore diameter of the N hub. Because of the
larger hub core diameter “ØND1”, the J hub cannot be used as a B hub, i.e. the hub core diameter is greater than the inside diameter
of the spacer tube and cannot project into the spacer. The J hub can be combined with any spacer.
NL
U1
6
ØND1
ØD1
ØDA
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
G_MD10_XX_00150
1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2
6/20 Siemens MD 10.1 · 2011