FLENDER Standard Couplings - DS TECH

FLENDER Standard Couplings
Fluid Couplings — FLUDEX Series
Oil filling quantities for FA series
© Siemens AG 2011
■ Selection and ordering data
This assignment is valid for a maximum starting torque
T max =2.0xT eff and mineral oils with a viscosity of
VG 22/VG 32, with drive via the hollow shaft.
If other operating fluids are used, or with drive via the housing or
T max ≠ 2.0 x T eff , changed filling quantities must be observed!
P eff Speed in rpm Size
600 740 890 980 1180 1470 1770 2300 2950 3550
kW Oil filling quantity in l
0.55 4.3 1.5 1.4 1.3 1.1
0.75 4.7 1.65 1.5 1.4 1.2
1.1 5.1 4.4 1.65 1.6 1.4 1.1
2.2 6.2 5.2 4.5 4.2 1.6 1.4 1.2
3.0 9.5 5.6 4.9 4.6 1.65 1.5 1.3 1.0
4.0 10.2 6.1 5.3 4.9 4.3 1.6 1.4 1.1
5.5 11.0 9.4 5.7 5.3 4.6 1.65 1.5 1.2 1.0
7.5 12.0 10.2 6.2 5.8 5.0 4.3 1.6 1.3 1.1
11 13.4 11.2 9.7 6.4 5.5 4.7 4.1 1.5 1.2 1.0 222
15 24.8 12.2 10.5 9.8 6.0 5.0 4.4 1.6 1.3 1.1
18 25.9 12.9 11.0 10.3 6.3 5.3 4.6 3.9 1.4 1.2
22 27.3 23.3 11.6 10.8 9.4 5.5 4.8 4.0 1.4 1.25
30 29.7 25.2 12.7 11.7 10.1 6.0 5.2 4.3 3.7 1.4
37 31.5 26.5 23.1 12.4 10.7 9.1 5.5 4.5 3.9 1.5
45 27.9 24.2 22.6 11.2 9.5 5.8 4.7 4.0 3.5 342
55 29.5 25.5 23.7 11.9 10.0 8.8 5.0 4.2 3.7
75 27.6 25.7 22.3 10.8 9.4 5.4 4.5 3.9
90 29.0 26.9 23.4 11.3 9.8 8.1 4.7 4.1
110 28.3 24.5 12.0 10.4 8.6 4.9 4.3
132 29.7 25.7 21.9 10.8 8.9 7.6 4.5
160 27.0 22.9 20.0 9.3 7.8 450
180 27.8 23.5 20.6 10.0 8.0
200 28.6 24.2 21.2 10.9 8.2
225 24.9 21.8 11.5 8.5
250 25.6 22.3 9.6
280 26.3 22.9 9.9
315 27.1 23.6 10.5
350 24.2 590
400 26.4
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
13
Ordering example type FAR from page 13/17:
Motor 45 kW, P eff =37kW, n 1 =1470rpm, maximum output
torque: T max =2.0xT eff .
Selection:
FLUDEX FAR coupling size 395,
Hollow shaft: Bore ØD1 = 60H7 mm with keyway to DIN 6885/1
and retaining screw.
Specification of oil filling quantity: 7.6 l (see under oil filling quantities
for the FA series in this catalog section).
Product code:
• With pulley 5xSPB224:
2LC0900-3AF90-0AA0-Z
L1E+Y90
plain text to Y90: 7.6 l
• With pulley 7xSPB236:
2LC0900-3AF91-0AA0-Z
L1E+Y90
plain text toY90: 7.6 l
• With 160 °C fuse:
2LC0900-3AF90-0AA0-Z
L1E+Y90+F08
plain text to Y90: 7.6 l
Ordering example type FADB from page 13/21:
Motor 30 kW, P eff =22kW, n 1 =1470 rpm
Selection:
FLUDEX FADB coupling size 342, standard type,
Hollow shaft: Bore ØD1 = 55H7 mm with keyway to DIN 6885/1
and retaining screw,
Part 13: Bore ØD2 = 50H7 mm with keyway to DIN 6885/1 and
set screw,
shaft end insertion depth L2 = 90 mm.
Delivery without oil filling, no oil filling quantity specification.
Product code:
•Part 13: Standard brake drum
2LC0900-2AC99-0AA0-Z
L1D+M1C+Y29
plain text to Y29: 90 mm
• Part 13: Long brake drum
2LC0900-2AC99-0BA0-Z
L1D+M1C+Y29
plain text to Y29: 90 mm
1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2
13/24 Siemens MD 10.1 · 2011