Operating instructions Built-in automatic coffee machine CVA ... - Miele

More documents

Recommendations

Info

Programming the machine To programme the machine, ^ Turn the selector to the programming position. The machine is now in programming mode and will respond according to the symbols shown under the buttons. ^ By pressing the - or e button – the required programming option in the display can be highlighted with an asterisk. Press ENTER to select the option. – the settings of the various programming options can be altered. – a time can be entered for the Standby option. ^ By pressing ENTER – a programming option highlighted with an asterisk can be selected. – an alteration to the programmed settings can be saved. If a setting is altered by mistake, do not press ENTER. Turn the selector to position "0". The altered setting will not be saved and the original setting will be retained. 14
Choosing a language The language for the commands in the display can be selected before the machine is used for the first time. ^ Turn the selector anti-clockwise to the programming position. The machine is now in programming mode and will respond according to the symbols shown under the buttons. Programming the machine The following will appear in the display: Programming option "Language" will be highlighted with an asterisk. ^ Press ENTER to confirm this option. The sub-menu will appear in the display as follows: ^ Press the e button until the required language appears (deutsch, nederlands, portugues, espanol, english, italiano or francais). ^ Press ENTER to save this setting, or turn the selector to "0" to undo the alterations if a mistake has been made. This will bring you back from the sub-menu. All commands in the display will now appear in the selected language. 15
Page 1 and 2: Operating instructions Built-in aut
Page 3 and 4: Contents Cleaning and care . . . .
Page 5 and 6: Description of the machine Interior
Page 7 and 8: Warning and Safety instructions Thi
Page 9 and 10: Warning and Safety instructions Sug
Page 11 and 12: Brief description Unlike standard c
Page 13: The machine can be programmed in ea
Page 17 and 18: ^ Press the e button to switch rins
Page 19 and 20: Programming the machine ^ Press ENT
Page 21 and 22: Switching the pre-brewing function
Page 23 and 24: ^ Press the e button to switch the
Page 25 and 26: Programming the machine ^ Turn the
Page 27 and 28: Filling the water and coffee bean c
Page 29 and 30: Filling the water and coffee bean c
Page 31 and 32: Coffee and espresso cups ^ Turn the
Page 33 and 34: Setting the portion sizes ^ Place a
Page 35 and 36: Making coffee The following will ap
Page 37 and 38: Making coffee If the selector is al
Page 39 and 40: Making coffee Cappuccino To make ca
Page 41 and 42: Making coffee Hot water When it is
Page 43 and 44: A good espresso with a thick, even
Page 45 and 46: Cleaning and care N.B.: To ensure t
Page 47 and 48: Cleaning and care Avoid the followi
Page 49 and 50: Cleaning and care Drip tray At the
Page 51 and 52: Cleaning and care If the "Empty was
Page 53 and 54: Cleaning and care ^ Remove the brew
Page 55 and 56: Cleaning and care ^ Place a contain
Page 57 and 58: Descaling The machine should be des
Page 59 and 60: Descaling ^ Place a large container
Page 61 and 62: The machine has an electronic safet
Page 63 and 64: Problem solving ^ Disconnect the ma
Page 65 and 66:
Problem solving . . . coffee is not
Page 67 and 68:
Problem solving . . . the brew unit
Page 69 and 70:
All electrical work should be carri
Page 71 and 72:
All electrical work should be carri
Page 73 and 74:
Installation The machine can also b
Page 75 and 76:
Installation Adjusting the hinges W
Page 77:
Glossary Espresso lungo is the larg
show all

Operating instructions Built-in automatic coffee machine CVA ... - Miele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?