Operating instructions Built-in automatic coffee machine CVA ... - Miele
Operating instructions Built-in automatic coffee machine CVA ... - Miele
Operating instructions Built-in automatic coffee machine CVA ... - Miele
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Problem solv<strong>in</strong>g<br />
. . . the brew unit cannot be removed.<br />
The brew unit can only be removed when the waste<br />
unit has been taken out.<br />
If the brew unit is still not removable, then it is not <strong>in</strong><br />
the right position.<br />
^ Close the door and switch the mach<strong>in</strong>e on. The<br />
brew unit will position itself correctly.<br />
. . . the brew unit cannot be pushed <strong>in</strong>to place <strong>in</strong><br />
the mach<strong>in</strong>e.<br />
The brew unit is not <strong>in</strong> the right position. For this the<br />
funnel must be set a little higher and the socket<br />
stand<strong>in</strong>g vertically.<br />
To position the brew unit correctly:<br />
^ With your f<strong>in</strong>ger press on the snap lock a and<br />
push the funnel downwards b.<br />
^ Push the socket over to the left as far as possible<br />
c.<br />
^ Press once on PRESS.<br />
The correct position as shown above is re<strong>in</strong>stated,<br />
and the brew unit can be pushed <strong>in</strong>to place <strong>in</strong> the<br />
mach<strong>in</strong>e.<br />
67