Operating instructions Built-in automatic coffee machine CVA ... - Miele

Cleaning and care
^ Clean the bolt a, and smear a little silicone
lubricant on it and on the joints b.
^ Place the brew unit in the machine.
Rinsing cycle: Degreasing the brew unit
Depending on the fat content of the coffee used, the
brew unit could become blocked. It should therefore
be cleaned after approx. 500 portions have been
prepared using the cleaning tablets supplied with
the machine. These have been specially formulated
for use in this coffee machine. They are available
from your Miele Dealer or from the Miele Spare Parts
Department.
To remind you to degrease the brew unit the
message "Rinsing Cycle" will appear in the
display after 500 portions. It will not go out until
the cleaning cycle has been carried out.
^ Three quarters fill the water container with fresh,
cold water and place it in the machine.
^ Remove the brew unit and place a cleaning tablet
in the funnel.
^ Replace the brew unit in the machine and close
the door.
54