V25 Getting Started - BobCAD-CAM
V25 Getting Started - BobCAD-CAM
V25 Getting Started - BobCAD-CAM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Adding Your Machine(s)<br />
<strong>BobCAD</strong>‐<strong>CAM</strong> Version 25 <strong>Getting</strong> <strong>Started</strong> Guide<br />
To add a machine, follow the instructions below.<br />
To access the Current Settings, and add a machine, do the following:<br />
In the <strong>CAM</strong> tree, under <strong>CAM</strong> Part. Right‐click Milling Tools and click Default then Current Settings . Use this<br />
method to add a machine.<br />
*IMPORTANT – Make sure to set this up under the Default not the Part Settings.<br />
From the Current Settings click on Machine Parameters then Click on Add. Give the machine a name and choose the<br />
type of machine you are adding (Either 3Axis or 4 Axis). Then click OK. Complete the rest of the information on the<br />
screen according to your machines specifications. Then click on Posting, Select the post‐processor you have installed,<br />
and set up the NC file Extension according to your machines specifications.<br />
Note: Full documentation on all of the Milling Settings / Current Settings dialogue can be found within the built in help<br />
system. To locate this information launch the help system by clicking on Help then Help Topics from within <strong>BobCAD</strong>.<br />
Search for the term “Current Settings”.<br />
12 Real CNC Programming Solutions for Global manufacturing |Copyright (c) <strong>BobCAD</strong>‐<strong>CAM</strong>, Inc. 2012