V25 Getting Started - BobCAD-CAM

More documents

Recommendations

Info

BobCAD‐CAM Version 25 Getting Started Guide Auto from Workspace ‐ automatically detects geometry. Pick ‐ is used to manually select geometry. Enter ‐ is used to type values for the stock size and location. Wireframe This type is used to extrude custom stock shapes from 2D geometry chains. Pick Geometry - enables selection mode for you to select the geometry used to create the stock. Solid Model This type is used to create stock that is the same shape as a solid model in the Workspace. Pick Solid Model - is used to select the solid model in the Workspace. STL File This type is used to create stock that is the same as a previously saved .stl file. Browse - is used to locate and open an .stl file to use as the stock. 18 Real CNC Programming Solutions for Global manufacturing |Copyright (c) BobCAD‐CAM, Inc. 2012
BobCAD‐CAM Version 25 Getting Started Guide The Stock Definition Dialog Box This dialog box is used to set the size and orientation of the stock geometry. After geometry is selected, the stock coordinate system is placed at the top and center of the stock. This coordinate system is only used a reference for setting the stock size and orientation and it is not related to the machining origin of the part. The page contains three groups: Size, Stock Orientation, and Offset. After setting the Stock Definition, click next to go to the Machine Setup. 19 Real CNC Programming Solutions for Global manufacturing |Copyright (c) BobCAD‐CAM, Inc. 2012
Page 2 and 3: BobCAD‐CAM Version 25 Getting Sta
Page 12 and 13: Adding Your Machine(s) BobCAD‐CAM
Page 32: BobCAD‐CAM Version 25 Getting Sta

V25 Getting Started - BobCAD-CAM

Create successful ePaper yourself

Delete template?

Save as template?