to download LG Multi V Plus - Hawco
to download LG Multi V Plus - Hawco
to download LG Multi V Plus - Hawco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Error No. Error Type Error Point Main Reasons<br />
106*<br />
Master<br />
11 → 061<br />
Slave1<br />
12 → 062<br />
Slave2<br />
13 → 063<br />
ODU Fan PCB IPM<br />
Fault<br />
Copyright ©2007 <strong>LG</strong> Electronics. Inc. All right reserved.<br />
Only for training and service purposes<br />
IPM protection circuit activation<br />
(over current / overheating)<br />
■ Error Diagnosis and Countermeasure Flow Chart<br />
Is fan mo<strong>to</strong>r assemble<br />
condition normal?<br />
Yes<br />
Is fan mo<strong>to</strong>r wire connection<br />
condition normal?<br />
Yes<br />
Is fan PCB assemble<br />
condition normal?<br />
Yes<br />
Is fan PCB assembly normal?<br />
Yes<br />
Recheck power and<br />
installation condition<br />
No<br />
No<br />
No<br />
No<br />
Fan Mo<strong>to</strong>r Wire connection<br />
Hall Sensor connection<br />
Check ODU fan mo<strong>to</strong>r assemble condition and locking<br />
→ Reassemble or replace if abnormality found<br />
1.Check fan mo<strong>to</strong>r U,V,W connec<strong>to</strong>r connection condition<br />
→ Reassemble wire if abnormality found<br />
2.Check fan mo<strong>to</strong>r wire disconnection<br />
→ Replace ODU fan mo<strong>to</strong>r if abnormality found<br />
1.Check fan PCB connec<strong>to</strong>r condition<br />
→ Reassemble if abnormality found<br />
2.Check assemble condition between fan PCB and Heatsink<br />
→ Reassemble heatsink if abnormality found<br />
Replace fan PCB assembly<br />
- 133 -<br />
Troubleshooting Guide<br />
1. Overload operation (Pipe clogging/Covering/EEV<br />
defect/Ref. overcharge<br />
2. ODU fan mo<strong>to</strong>r assemble condition abnormal<br />
(Coil disconnection/Short/Insulation damage)<br />
3. Fan PCB heatsink assemble condition abnormal<br />
4. Fan PCB assembly defect<br />
Fan IPM assemble position<br />
Check assemble condition<br />
Fan Heatsink assemble position<br />
Check assemble condition<br />
<strong>LG</strong>E Internal Use Only
Change language