Contractors' Questionnaire - Construction Owners Association of ...

3.6 Equipment
Instructions
Please complete the following tables indicating quantity and engineering work-hours for the
categories appropriate to your project. If you cannot enter all data then enter totals only. Include
rework in the work-hours only. If the project had no work-hours or quantities for a category,
enter none.
The Total Quantity of equipment is the amount of tagged items provided in the final Issued for
Construction (IFC) drawings with vendor designed skids being counted as a single item. The
Individually Designed quantity is the quantity defined by unique data sheets. For example, pump
P201a/b is one unique data sheet, but is a total of two items.
These hours include only mechanical discipline hours.
Refer to the section “Instructions for Computation of Work-Hours and Rework-Hours” for an
additional detailed listing of direct hours to be included and indirect hours that are to be excluded
from the computation of the work-hours.
Which design platform was used for this category in this project? Check all that apply.
2D ( )
3D ( )
Pressure Vessels
None
Individually
Designed
(each)
Total
Quantity
(each)
Engineering WH
(including rework)
(hours)
This includes tray/packed towers, columns, reactors/regenerators, and miscellaneous other
pressure vessels.
Field fabricated towers, columns, reactors and regenerators are to be included.
Atmospheric Tanks
None
Individually
Designed
(each)
Total
Quantity
(each)
Engineering WH
(including rework)
(hours)
This includes storage tanks, floating roof tanks, bins/hoppers/silos/cyclones, cryogenic & low
temperature tanks and miscellaneous other atmospheric tanks.
Heat Transfer
Equipment
None
Individually
Designed
(each)
Total
Quantity
(each)
Engineering WH
(including rework)
(hours)
This includes heat exchangers, fin fan coolers, evaporators, cooling towers and
miscellaneous other heat transfer equipment.
26