pump body of PPH - Progalva

More documents

Recommendations

Info

DOSING STATION > Manual Injectors for Small Pipes Usage mode: This injection pump allows the injection of products like antifreezing agents and other substances for water conditioning in heating and sanitary installations (with the exception of solvents and oil products). Properties: - capacity 5 l - maximal pressure 3 bar Supplied together with: - a pressure gauge from 0 to 5 bar - a ¼ valve - a non-return valve - a security valve - an 1 m long flexible tube with ⅜ “ connection Ref. no Product 3974 Manual pump for small pipes > Electrical Injector for Small Pipes Usage mode: This injection pump allows for injecting products like antifreezing agents and other products for water conditioning of heating and sanitary installations (with the exception of solvents and oil products). Properties: - Motor 40 W - Flow rate 120 l/h - Pressure 2 bar - 12/30/60 l tank Supplied together with: - a 1 m long flexible tube with ⅜ “ connection. Ref. no Product 3968 Electrical injection pump 12 l 3969 Electrical injection pump 30 l 3973 Electrical injection pump 60 l on trolley 10
FILMLIKE LIMESTONE REMOVING AND ANTICORROSIVE SOLUTION FOR WARM-WATER PREPARATION > PEP 04 Description: The relatively hard water (< 19˚dH) forms mud and rust deposits in warm-water pipes because of corrosion and limestone formation. PEP 04 combines the properties of phosphates and silicates , prevents corrosion and limestone deposits. The two effects of PEP 04 are : - Limestone removal: the calcium and magnesium ions are inhibited by the polyphosphate and their chemical transformation is stopped. The forming of the limestone cristalls is prevented in this way. - Anticorrosion: phosphates and silicates form negative particles at the anodes of the solution of iron and calcium, it isolates the metal from the oxidating elements. Physical and chemical properties: - colourless and scentless fluid - density: 1,16 (±0,02) - pH-value in 1% solution >9,0 - critical point: -6˚C Usage mode: The dosage of PEP 04 depends on the conditioning water quantity and the pipes’ state. Product ready to use. The inlet of the product depends on the rate flow and is made through a dosing station. Recommendation: Inlet in the circuit is done through a dosing station directly depending on the water flow rate. Reservation: Exclusive professional usage. See security data sheet. Packaging: 20 l can with Ref. no. 8452. User recommendation: Product for professional usage according to instructions. We do not assume any responsibility in case of inexpediently use of the product. CHLORINE DISINFECTION PRODUCT > Prochlore Description: Prochlore is a disinfection product for drinking water pipes and is used as oxidating means for microbiological germs. Its various efficiency is very large, it acts on groups of micro-organisms from water supply szstems. PROCHLORE is used as preventive conditioning for warm-water pipes. In its form the hydrochloric acid acts upon the membrane of the micro-organisms and blocks the enzymatic functioning of the metabolism through its oxidating action upon their tissues. PROCHLORE has a specific remanent effect as all the chlorine substances. It is also used against the Legionella bacteria proliferation (as preventive or curative treatment). Physical and chemical properties: - complex of sodic hypochloride at 48˚chlorinemetric and phosphate substances for stabilising the product. - colourless fluid - pH-value in 1% solution : 11 - density: 1,23 Usage mode: Considering that: - 1 g chlorinemetric = 3,17 g chlorine / l - Prochlore is 48 º chlorinemetric, that is 48 x 3,17 g = 152,16 g free chlorine/l Dosing table for curative treatment: Dosing of free chlorine Contact time 150 mg/l 30 minutes 100 mg/l 4 hours 50 mg/l 12 hours Dosing for preventive treatment: Maximal 1,5 mg/l Recommendation: The pipes must be clean, rinsed and disinfected when: - it funktions for the first time - after repair and modifications - it is infected. Precautions: When a pipe is infected with the Legionella bacteria , it is recommended to undergo a preventive treatment after the curative one. PROCHLORE must be deposited in aired rooms. It is vorbidden to mix it with acids. Reservation: Exclusive professional usage. See security data sheet. Packaging: 5 l can with Ref.no.8453 and 20 l can with Ref.no.8454. User recommendation: Product for professional usage according to instructions. We do not assume any responsibility in case of inexpediently use of the product. 11
Page 2 and 3: ANTIFREEZE SOLUTIONS ANTIFREEZE SOL
Page 4 and 5: ANTIFREEZE SOLUTIONS FOR AIRCONDITI
Page 6 and 7: ANTIFREEZE SOLUTIONS FOR AIRCONDITI
Page 8 and 9: Fluigel Antifreezing Agent for Floo
Page 12 and 13: LIMESTONE REMOVING PUMP > Tubnet cl
Page 14 and 15: TARTAR REMOVAL PUMP > Tubnet 6000 4
Page 16 and 17: LIMESTONE REMOVAL AND ANTIOXIDISING
Page 18 and 19: LIMESTONE REMOVAL AND ANTIOXIDISING
Page 20 and 21: MAGNETIC FILTER > Oxide and Mud Rem
Page 22 and 23: MAGNETIC FILTER > Clarimag 3 Usage
Page 24 and 25: MAGNETIC FILTER > Clarimag 15 Usage
Page 26 and 27: DESOXIDISING AND MUD REMOVAL PRODUC
Page 28 and 29: Inhibitory and Protective Products
Page 30 and 31: BIOCIDE FOR HEATING AND AIR-CONDITI
Page 32 and 33: PROXYDE (Ecora) Description: PROXYD
Page 34 and 35: AUTOMATED TREATMENT ON DOSING LEVEL
Page 36: Water from Installations Parameter

pump body of PPH - Progalva

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?