pump body of PPH - Progalva

TARTAR REMOVAL PUMP
> Tubnet 6000 4V (pump body of PPH)
Our new pump range is developed with a very progressive tehnology,
the used materials resist to acids or bases.
They are equipped with a Ø90 mm filling hole, it allows a rapid
filling.
Its stability and sealing assure secure transport.
Properties of Tubnet 6000 inversor pump ref. no. 4011:
Assures the necessary volume in circulation loop of the product.
Assures the pressure of the nominal rate flow for the loss of
electricity charge of the network.
Power: 0,75 kW
Flow rate: 6500 l/h
Pressure: 2 bar
Weight: 42 kg
Dimension: L 730 x 620 x 970 mm
Supplied together with 2 flexible tubes of Ø 20 mm, 2,5 m long with
20 x 27 connection
Equipped with air-wheels and removable axes for ascending and
descending stairs.
Kit V6 for TUBNET 6000 ref. no. 19660
The V6 Kit is a circuit selector.
3 positions:
- rinsing motion
- total stop
- pump function (limestone and impurities removal ).
After connection one can start the removal of limestone, mud or
residue , then rinse, when necessary alternate the water circulation
direction without disconnecting the pump from the water pipes.
In this way you will obtain easeness, efficiency, power and security.
Contents:
- 6 way-selector
- flexible rinsing tube 2 x 5 m
- flexible limestone and mud removing tube 2 x 3 m
Ref. no. Product
4011 TUBNET 6000 inverseur
4012 TUBNET 6000 inverseur + kit V6
19660 Kit V6 for Tubnet 6000 inverseur
14