17.11.2012 Views

pump body of PPH - Progalva

pump body of PPH - Progalva

pump body of PPH - Progalva

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ANTIFREEZE SOLUTIONS FOR AIRCONDITIONING PLANTS<br />

> Net Gel Clim Sanit<br />

Description:<br />

NET GEL CLIM SANIT is an antifreezing agent on monopropylene-glycol basis and corrosion inhibitory agents,<br />

used in airconditioning circuits where a fluidification <strong>of</strong> the antifreezing agent at low temperature is necessary.<br />

Physical and chemical properties:<br />

- Red fluid<br />

- Density 1,045.<br />

- PH-value: 8,5 – 9.<br />

- Non toxic.<br />

Usage mode:<br />

According to the following table:<br />

Concentration % Density at 20˚C Protection at ˚C<br />

50 1,035 -33<br />

40 1,030 -21<br />

30 1,024 -14<br />

Determining the quantity <strong>of</strong> NET GEL CLIM SANIT to be injected:<br />

- By evaluating the capacity <strong>of</strong> the installation to be protected<br />

- By determinating the protection temperature (see table no.1)<br />

Cleaning the installation:<br />

- It is recommended to previously clean the installation.<br />

- If mud or oxides are present they must be removed previous to using antifreezing agents.<br />

- Even when none <strong>of</strong> the above-mentioned substances exist, a complete evacuation and rinsing before NET GEL<br />

CLIM SANIT usage is necessary.<br />

Introduction <strong>of</strong> NET GEL CLIM SANIT in the pipes by 2 methods:<br />

1 - Filling procedure: Net Gel will be introduced through the highest installation point, for many times , in order to<br />

obtain a homogenous composition.<br />

2 - A mixture <strong>of</strong> water and antifreezing agent can also be used, mixing them in a tub to have it homogenous, the<br />

mixture will then be introduced with an injection <strong>pump</strong> through an evacuation point or a valve.<br />

Quality check for the antifreezing agent mixture:<br />

- Control will be done every 2 years.<br />

- Antifreezing agent concentration: density (see above table).<br />

- Anticorrosive effect with alkaline pH-value.<br />

Recommendation:<br />

In case <strong>of</strong> huge installations made out <strong>of</strong> various metals a intensifying inhibitory solution may be needed in order to<br />

prevent corrosion (we recommend our consulting).<br />

The ideal dosage beginns from 30% up for a better balance between inhibitory and alkaline reserves.<br />

Reservation:<br />

Exclusive pr<strong>of</strong>essional usage. See security data sheet.<br />

Packaging:<br />

20 l and 200 l can.<br />

User recommendation:<br />

Product for pr<strong>of</strong>essional usage according to instructions. We do not assume any responsibility in case <strong>of</strong> inexpediently<br />

use <strong>of</strong> the product.<br />

4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!