pump body of PPH - Progalva

DISINFECTION TREATMENT OF AIR-COOLING PLANTS
> BIOCIDE 80
Description: BIOCID 80 is a powerful disinfection product on quadruple amonium basis, with surfactant agents and
algae, bacteriae and fungi killing substances .
Special solution for distroying micro-organisms from air-cooling installations.
The usage range is very large and has huge usage flexibility.
Must be used sequentially , no continuous injection.
To play for safety we recommend alternating the product with BIOCIDE 90 as it has a different
mollecular structure.
Physical and chemical properties:
Ready to use fluid
Density at 20ºC : 1,05
pH-value (pure): 7,3
Usage mode: manuel injection through dosing pump.
For a rapid bacteriae distruction the shock dosis is 300 g/ m 3.
BIOCIDE 80 cannot be mixed in treatment with chlorine or peroxide based products.
Recommendation: BIOCIDE 80 kills the most often micro-organisms found in the air-cooling systems.
Its formula allows the degrading , it is non-pollutive (when kept within a certain concentration)
Is easy to use and needs no special technical devices .
Reservation: Exclusive professional usage. See security data sheet.
Packaging: 20 l can with Ref. no. 8455
User recommendation: Product for professional usage according to instructions. We do not assume any
responsibility in case of inexpediently use of the product.
> BIOCIDE 90
Description: BIOCID 90 is a strong disinfection product on quadruple amonium basis, with surfactant agents,
glutaraldehyde, algae, bacteriae and fungi killing substances.
Special solution for distroying micro-organisms from air-cooling installations.
The usage range is very large and has huge usage flexibility.
Must be used sequentially , no continuous injection.
To play for safety we recommend alternating the product with BIOCIDE 80 as it has a different
mollecular structure.
Physical and chemical properties:
Ready to use red fluid
Density at 20ºC : 1,05
pH-value (pure): 7,3
Usage mode: manuel injection through dosing pump
For a rapid bacteriae distruction the shock dosis is 300 g/ m 3.
BIOCIDE 90 cannot be mixed in treatment with chlorine or peroxide based products.
Recommendation: BIOCIDE 90 kills the most often micro-organisms found in the air-cooling systems.
Its formula allows the degrading , it is non-pollutive (when kept within a certain concentration)
Is easy to use and needs no special technical devices .
Reservation: Exclusive professional usage. See security data sheet.
Packaging: 20 l can with Ref.no.8456
User recommendation: Product for professional usage according to instructions. We do not assume any
responsibility in case of inexpediently use of the product.
33