You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRODUCT MANUAL<br />
11 IINNTTRROODDUUCCTTIIOONN<br />
PRODUCT DESCRIPTION<br />
<strong>Quad</strong>-<strong>Lock</strong> - The Most Versatile Insulating Concrete Forms<br />
Build nearly unlimited wall widths, 3 different insulation values, corners, angles, T-walls, columns, pilasters, brick ledges,<br />
and radius walls, using just a few standard components.<br />
Panels made of Expanded Polystyrene (EPS) and ties made of High Density Polyethylene (HDPE) or Polypropylene (PP)<br />
create a concrete form that will accommodate vertical and horizontal reinforcing steel as required. Temporary bracing is<br />
usually required for vertical and horizontal alignment only. Filling the cavity with concrete will create solid concrete walls<br />
with 2-4 hour Fire Resistance Ratings (FRR). The EPS Forming System will stay in place and turn into the best insulation<br />
available today, saving you energy costs for the lifetime of the building.<br />
Five different wall widths are available (nominal concrete widths of 12" [305mm], 10" [250mm], 8" [200mm], 6" [150mm],<br />
and 4" [100mm]) and can be combined with the <strong>Quad</strong>-<strong>Lock</strong> XT Extender Tie to add 12" [305mm] to any standard cavity<br />
size.<br />
Three Insulation Values are possible, giving you the choice of true R-Values of 22, 30 and 38 (h*ft²*°F/BTU) / U-values of<br />
0.28, 0.20 and 0.15 (W/(m²*K)).<br />
The <strong>Quad</strong>-<strong>Lock</strong> System encompasses these components:<br />
• Panels made of EPS, available in 2 thicknesses (2¼" and 4¼" [51mm and 108mm])<br />
• Ties made of High Density Polyethylene (HDPE) or Polypropylene (PP)<br />
o 5 standard lengths plus Extender Ties and Brick Ledge Ties<br />
• Corner, Angle and Window Brackets to eliminate bracing at corners<br />
• Metal J-Track, Flex-Track and Wire Top Ties for starting and finishing the wall assembly<br />
These components will allow you to assemble all concrete forming for your walls, including corners, arches, any angles,<br />
columns and pilasters, as well as T–Wall connections. Transport and storage costs of <strong>Quad</strong>-<strong>Lock</strong> are substantially lower<br />
compared to pre-assembled block systems. Ordering and keeping track of inventory is easier (you would need at least 45<br />
different parts to do the same with pre-assembled blocks).<br />
The Excel-based <strong>Quad</strong>-<strong>Lock</strong> Estimating program makes it quick and easy to calculate all materials needed for your job<br />
and the cost.<br />
July 2009 Chapter 1 – Introduction Page 1