TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N Routerparameters from your ISP. Click the Release button to release the IP parameters.‣ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networksis 1500 Bytes. It is not recommended that you change the default MTU Size unless requiredby your ISP.‣ Use These DNS Servers - If your ISP gives you one or two DNS addresses, select UseThese DNS Servers and enter the primary and secondary addresses into the correct fields.Otherwise, the DNS servers will be assigned dynamically from your ISP. Note:If you find error when you go to a website after entering the DNS addresses, it is likely thatyour DNS servers are set up improperly. You should contact your ISP to get DNS serveraddresses.‣ Host Name - This option specifies the Host Name of the Router.‣ Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcastapplications. If you cannot get the IP Address normally, you can choose this option. (It israrely required.)Click the Save button to save your settings.2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,select Static IP. The Static IP settings page will appear, shown in Figure 4-6.Figure 4-6 WAN - Static IP- 28 -