TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

More documents

Recommendations

Info

TL-WR841N/TL-WR841ND300Mbps Wireless N RouterFigure 4-21 Wireless MAC FilteringTo filter wireless users by MAC Address, click Enable. The default setting is Disable.‣ MAC Address - The wireless station's MAC address that you want to filter.‣ Status - The status of this entry, either Enabled or Disabled.‣ Description - A simple description of the wireless station.To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or ModifyWireless MAC Address Filtering entry" page will appear, shown in Figure 4-22:Figure 4-22 Add or Modify Wireless MAC Address Filtering entryTo add or modify a MAC Address Filtering entry, follow these instructions:1. Enter the appropriate MAC Address into the MAC Address field. The format of the MACAddress is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:00-0A-EB-B0-00-0B.2. Give a simple description for the wireless station in the Description field. For example:Wireless station A.- 46 -
TL-WR841N/TL-WR841ND300Mbps Wireless N Router3. Select Enabled or Disabled for this entry on the Status drop-down list.4. Click the Save button to save this entry.To modify or delete an existing entry:1. Click the Modify in the entry you want to modify. If you want to delete the entry, click theDelete.2. Modify the information.3. Click the Save button.Click the Enable All button to make all entries enabledClick the Disabled All button to make all entries disabled.Click the Delete All button to delete all entries.Click the Next button to go to the next page.Click the Previous button to return to the previous page.For example: If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B andthe wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the Router, but allthe other wireless stations cannot access the Router, you can configure the Wireless MACAddress Filtering list by following these steps:1. Click the Enable button to enable this function.2. Select the radio button “Deny the stations not specified by any enabled entries in the list toaccess” for Filtering Rules.3. Delete all or disable all entries if there are any entries already.4. Click the Add New... button.1) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.2) Enter wireless station A/B in the Description field.3) Select Enabled in the Status drop-down list.4) Click the Save button.5) Click the Back button.The filtering rules that configured should be similar to the following list:- 47 -
Page 1 and 2:
TL-WR841NTL-WR841ND300Mbps Wireless
Page 3 and 4: FCC RF Radiation Exposure Statement
Page 5 and 6: 低功率射頻電機之使
Page 7 and 8: CONTENTSPackage Contents...........
Page 9 and 10: 4.16.5 Backup & Restore............
Page 11 and 12: TL-WR841N/TL-WR841ND300Mbps Wireles
Page 53: TL-WR841N/TL-WR841ND300Mbps Wireles
Page 105 and 106:
TL-WR841N/TL-WR841ND300Mbps Wireles
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115:
show all

TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

Create successful ePaper yourself

Delete template?

Save as template?