TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N Router4.7 DHCPFigure 4-25 The DHCP menuThere are three submenus under the DHCP menu (shown in Figure 4-25), DHCP Settings,DHCP Clients List and Address Reservation. Click any of them, and you will be able toconfigure the corresponding function.4.7.1 DHCP SettingsChoose menu “DHCP → DHCP Settings”, you can configure the DHCP Server on the page asshown in Figure 4-26.The Router is set up by default as a DHCP (Dynamic Host ConfigurationProtocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected tothe Router on the LAN.Figure 4-26 DHCP Settings‣ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you musthave another DHCP server within your network or else you must configure the computermanually.‣ Start IP Address - Specify an IP address for the DHCP Server to start with when assigningIP addresses. 192.168.0.100 is the default start address.‣ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IPaddresses. 192.168.0.199 is the default end address.- 50 -