TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N Router• Radius Port - Enter the port number of the Radius server.• Radius Password - Enter the password for the Radius server.• Group Key Update Period - Specify the group key update interval in seconds. The valueshould be 30 or above. Enter 0 to disable the update.‣ WPA-PSK/WPA2-PSK – Personal (Recommended) - It’s the WPA/WPA2 authenticationtype based on pre-shared passphrase.• Version - you can choose the version of the WPA-PSK security on the drop-down list. Thedefault setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) orWPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station'scapability and request.• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can selecteither Automatic, or TKIP or AES as Encryption. Note:If you check the WPA-PSK/WPA2-PSK – Personal (Recommended) radio button andchoose TKIP encryption, you will find a notice in red as shown in Figure 4-20.Figure 4-20• PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to64 Hexadecimal characters.• Group Key Update Period - Specify the group key update interval in seconds. The valueshould be 30 or above. Enter 0 to disable the update.Be sure to click the Save button to save your settings on this page.4.6.3 Wireless MAC FilteringChoose menu “Wireless → MAC Filtering”, you can control the wireless access by configuringthe Wireless MAC Filtering function, shown in Figure 4-21.- 45 -