TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N Router‣ Subnet Mask - The Subnet Mask determines which portion of an IP address is the networkportion, and which portion is the host portion.‣ Gateway - This is the IP address of the gateway device that allows for contact between theRouter and the network or host.‣ Interface - This interface tells you whether the Destination IP Address is on the LAN &WLAN (internal wired and wireless networks), the WAN(Internet).Click the Refresh button to refresh the data displayed.4.13 Bandwidth ControlFigure 4-59There are two submenus under the Bandwidth Control menu as shown in Figure 4-59. Click anyof them, and you will be able to configure the corresponding function. The detailed explanationsfor each submenu are provided below.4.13.1 Control SettingsChoose menu “Bandwidth Control → Control Settings”, you can configure the EgressBandwidth and Ingress Bandwidth in the next screen. Their values you configure should be lessthan 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and askyour ISP for the total bandwidth of the egress and ingress.Figure 4-60 Bandwidth Control Settings‣ Enable Bandwidth Control - Check this box so that the Bandwidth Control settings cantake effect.‣ Line Type - Select the right type for you network connection. If you don’t know how tochoose, please ask your ISP for the information.‣ Egress Bandwidth - The upload speed through the WAN port.- 77 -