TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N RouterFigure 4-41 Remote Management‣ Web Management Port - Web browser access normally uses the standard HTTP serviceport 80. This Router's default remote management web port number is 80. For greatersecurity, you can change the remote management web port to a custom port by entering thatnumber in the box provided. Choose a number between 1 and 65534 but do not use thenumber of any common service port.‣ Remote Management IP Address - This is the current address you will use when accessingyour Router from the Internet. This function is disabled when the IP address is set to thedefault value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to255.255.255.255, then all the hosts can access the Router from internet. Note:3) To access the Router, you should type your Router's WAN IP address into your browser'saddress (in IE) or Location (in Navigator) box, followed by a colon and the custom portnumber. For example, if your Router's WAN address is 202.96.12.8, and the port numberused is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may beasked for the Router's password. After successfully entering the username and password,you will be able to access the Router's web-based utility.4) Be sure to change the Router's default password to a very secure password.4.10 Parental ControlChoose menu “Parental Control”, and you can configure the parental control in the screen asshown in Figure 4-42. The Parental Control function can be used to control the internet activitiesof the child, limit the child to access certain websites and restrict the time of surfing.- 63 -