TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

More documents

Recommendations

Info

TL-WR841N/TL-WR841ND300Mbps Wireless N RouterClick Start to check the connectivity of the Internet.The Diagnostic Results page displays the result of diagnosis.If the result is similar to the following screen, the connectivity of the Internet is fine. Note:Figure 4-74 Diagnostic ResultsOnly one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “PingTimeout” are used for Ping function. Option “Tracert Hops” are used for Tracert function.4.16.3 Firmware UpgradeChoose menu “System Tools → Firmware Upgrade”, you can update the latest version offirmware for the Router on the following screen.Figure 4-75 Firmware Upgrade‣ Firmware Version - This displays the current firmware version.‣ Hardware Version - This displays the current hardware version. The hardware version of theupgrade file must accord with the Router’s current hardware version.To upgrade the Router's firmware, follow these instructions below:1. Download a more recent firmware upgrade file from the TP-LINK website(http://www.tp-link.com).2. Type the path and file name of the update file into the File field. Or click the Browse button tolocate the update file.3. Click the Upgrade button.- 88 -
TL-WR841N/TL-WR841ND300Mbps Wireless N Router Note:1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.There is no need to upgrade the firmware unless the new firmware has a new feature you wantto use. However, when experiencing problems caused by the Router rather than theconfiguration, you can try to upgrade the firmware.2) When you upgrade the Router's firmware, you may lose its current configurations, so beforeupgrading the firmware please write down some of your customized settings to avoid losingimportant settings.3) Do not turn off the Router or press the Reset button while the firmware is being upgraded,otherwise, the Router may be damaged.4) The Router will reboot after the upgrading has been finished.4.16.4 Factory DefaultsChoose menu “System Tools → Factory Defaults”, and you can restore the configurations ofthe Router to factory defaults on the following screenFigure 4-76 Restore Factory DefaultClick the Restore button to reset all configuration settings to their default values.• The default User Name: admin• The default Password: admin• The default IP Address: 192.168.0.1• The default Subnet Mask: 255.255.255.0 Note:Any settings you have saved will be lost when the default settings are restored.4.16.5 Backup & RestoreChoose menu “System Tools → Backup & Restore”, you can save the current configuration ofthe Router as a backup file and restore the configuration via a backup file as shown in Figure4-77.- 89 -
Page 1 and 2:
TL-WR841NTL-WR841ND300Mbps Wireless
Page 3 and 4:
FCC RF Radiation Exposure Statement
Page 5 and 6:
低功率射頻電機之使
Page 7 and 8:
CONTENTSPackage Contents...........
Page 9 and 10:
4.16.5 Backup & Restore............
Page 11 and 12:
TL-WR841N/TL-WR841ND300Mbps Wireles
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46: TL-WR841N/TL-WR841ND300Mbps Wireles
Page 95: TL-WR841N/TL-WR841ND300Mbps Wireles
Page 115: TL-WR841N/TL-WR841ND300Mbps Wireles
show all

TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?