TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N Router‣ User Name/Password - Enter the User Name and Password provided by your ISP. Thesefields are case-sensitive.‣ Auth Server - Enter the authenticating server IP address or host name.‣ Auth Domain - Type in the domain suffix server name based on your location.e.g.NSW / ACT - nsw.bigpond.net.auVIC / TAS / WA / SA / NT - vic.bigpond.net.auQLD - qld.bigpond.net.au‣ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networksis 1500 Bytes. It is not recommended that you change the default MTU Size unless requiredby your ISP.‣ Connect on Demand - In this mode, the Internet connection can be terminated automaticallyafter a specified inactivity period (Max Idle Time) and be re-established when you attempt toaccess the Internet again. If you want your Internet connection keeps active all the time,please enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you wantto have elapsed before your Internet access disconnects.‣ Connect Automatically - The connection can be re-established automatically when it wasdown.‣ Connect Manually - You can click the Connect/Disconnect button to connect/disconnectimmediately. This mode also supports the Max Idle Time function as Connect on Demandmode. The Internet connection can be disconnected automatically after a specified inactivityperiod and re-established when you attempt to access the Internet again.Click the Connect button to connect immediately. Click the Disconnect button to disconnectimmediately.Caution: Sometimes the connection cannot be terminated although you specify a time to Max IdleTime because some applications are visiting the Internet continually in the background.Click the Save button to save your settings.5. If your ISP provides L2TP connection, please select L2TP/Russia L2TP option. And youshould enter the following parameters (Figure 4-10):- 33 -