TL-WR841N TL-WR841ND 300Mbps Wireless N Router - TP-Link

TL-WR841N/TL-WR841ND300Mbps Wireless N Routerscreen as shown in Figure 4-40. The management feature allows you to deny computers in LANfrom accessing the Router.Figure 4-40 Local ManagementBy default, the radio button “All the PCs on the LAN are allowed to access the Router'sWeb-Based Utility” is checked. If you want to allow PCs with specific MAC Addresses to accessthe Setup page of the Router's Web-Based Utility locally from inside the network, check the radiobutton “Only the PCs listed can browse the built-in web pages to perform Administratortasks”, and then enter each MAC Address in a separate field. The format for the MAC Address isXX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed canuse the password to browse the built-in web pages to perform Administrator tasks while all theothers will be blocked.After click the Add button, your PC's MAC Address will be placed in the list above.Click the Save button to save your settings. Note:If your PC is blocked but you want to access the Router again, use a pin to press and hold theReset Button (hole) on the back panel for about 5 seconds to reset the Router’s factory defaultson the Router’s Web-Based Utility.4.9.4 Remote ManagementChoose menu “Security → Remote Management”, you can configure the Remote Managementfunction in the screen as shown in Figure 4-41. This feature allows you to manage your Routerfrom a remote location via the Internet.- 62 -