Overview in PDF format - Tallinna Tehnikaülikool

REFERENCESAltintas, Y. (2000). Manufacturing Automation: Metal Cutting Mechanics, MachineTool Vibrations, and CNC Design, Cambridge University Press.Aryassov, G., Otto, T. and Gromova, S. (2004). “Advanced Dynamic Models forEvaluation of Accuracy of Machining on Lathes”, Proc. Estonian Acad. Sci. Eng. 10,270–280.Aryassov, G., Pappel, T. and Gromova, S. (2003). “Effect of Vibration on Accuracy ofProcessed Details when Cutting”, Proceedings of 20th International Conference onMathematical Modelling in Mechanics of Solids and Structures by Boundary & FEM,Vol. 2, St. Petersburg, 51–57.Astakhov, V.P. (1999). Metal Cutting Mechanics, CRC Press LLC.Bayard, O. (2003). “Investigation of Forces and Contact Area for Modelling TurningProcess”, Ph.D. diss. Chair of Production Engineering, Department of ProductionEngineering, The Royal Institute of Technology, Stockholm.Birchfield, G. (2000). Plant Reliability – A New Approach to Understanding PlantReliability Underscores the Importance of Advanced Process Knowledge ManagementSystems, Solomon Associates, AspenWorld Conference.Burns, A. (2003). “How to Verify a Safe Real-Time System: the Application of ModelChecking and Timed Automata to the Production Cell Case Study”, Real-Time Systems,24, 135–151.Clarke, E.M., Grumberg, O. and Peled, D.A. (1999). Model Checking. The MIT Press.Gallagher, S. (1998). “Beat the Systems Management Odds”, Information Week, Vol.675, 61–76.Gåsvik, K.J (1995). Optical Metrology, Chichester: John Wiley & Sons.Håkansson, L. (1999), “Adaptive Active Control of Machine-Tool Vibration in aLathe”, Department of Production and Materials Engineering, Lund University, KFSAB Lund.Heijden, F. (1995). Image Based Measurement Systems, Chichester: John Wiley &Sons.Jaanson, A. (1993). “Mathematical Models of the Metal Cutting Process. Stages ofDevelopment and Perspectives”, Preprints of Tallinn Technical University. Tallinn.Jähne, B (1997). Practical Handbook on Image Processing for Scientific Applications,New York: CRC Press.Karaulova, T., Papstel, J., Otto, T. (2002). “Machine Cell Modeling and Monitoring”,Proceedings of 3rd International Conference of DAAAM National Estonia, IndustrialEngineering – New Challenges to SME, Tallinn, 92–95.Karaulova, T. (2004). “Development of the Modelling Tool for the Analysis of theProduction Process and its Entities for SME”, Ph.D. diss. Tallinn: TUT Press.61