AXF magnetic flowmeter - Istec Corp.

More documents

Recommendations

Info

Replaceable Electrode TypeElectrode parts can be put into unit to facilitatereplacement or mounting at customer site.The optional dedicated tool (F9807SK) is required.Replaceable electrodes are available for thefollowing:AXF standard:UseGeneral-Purpose UseProcessConnectionWaferFlangeAvailableSize25 to 300 mm(1.0 to 12 in.)25 to 400 mm(1.0 to 16 in.)LiningPFA/PolyurethaneRubberElectrodeMaterialJIS SUS316L(AISI 316LSS/EN1.4404equivalent) ( * 1)T06.EPSReplacement model for earlier ADMAG or ADMAG AE:UseGeneral-Purpose UseProcessConnectionFlangeAvailableSize150 to 250 mm(6.0 to 10 in.)LiningPFA/PolyurethaneRubberElectrodeMaterialJIS SUS316L(AISI 316LSS/EN1.4404equivalent) ( * 1)T07.EPS*1: If any other electrode materials are required, pleasecontact Yokogawa office.Mounting/Shapes (Remote Flowtube):• Electrical Connection: ANSI 1/2 NPT femaleISO M20 1.5 femaleJIS G1/2 (PF1/2) female• Direction of Electrical Connection: The direction can bechanged even after delivery.Note: In case of submersible types, an optional codeDHC, and sizes of 1100 mm or larger, the directioncan not be changed after delivery.• Terminal Connection at Terminal Box: M4 size screwGrounding:Grounding resistance 100 Ω or less* In case of explosion proof type except TIIS, follow thedomestic electrical requirements as regulated in eachcountry.* In case of TIIS Flameproof type, refer to description of“HAZARDOUS AREA CLASSIFCATION”.Combined Converter:•A remote flowtube for sizes of up to 400 mm can becombined with the AXFA11 Converter or the AXFA14Converter. If a combined converter is changed fromAXFA11 to AXFA14 or vice versa, a new meter factormust be adjusted by flow calibrations.• In case that size 250 mm (10 in.) or larger is used in lowconductivity or high concentration slurries, please usethe AXFA11 Converter.•A remote flowtube for sizes of 500 mm or larger can becombined with the AXFA11 Converter only.• Maximum Cable Length:Combination of AXF remote Flowtube and AXFA11:up to 200 m (660 ft)Combination of AXF remote Flowtube and AXFA14:up to 100 m (330 ft)10■ HAZARDOUS AREA CLASSIFICATIONFM:*AXF002C – AXF400CApplicable Standard:FM3600, FM3610, FM3615,FM3810, ANSI/NEMA 250(Integral Flowmeter)Explosion proof for Class I, Division 1, Groups A, B, C& D.Dust-ignition proof for Class II/III, Division1, Groups E,F & G.Intrinsically safe (electrodes) for Class I, Division 1,Groups A, B, C & D.“SEAL ALL CONDUITS WITHIN 18 INCHES”“WHEN INSTALLED IN DIV. 2, SEALS NOT REQUIRED”Electrode Circuit Um: 250 Vac/dcMaximum power supply voltage: 250 Vac/130 VdcExcitation Circuit: 140V maxEnclosure: NEMA 4XTemperature Code: T6Refer to following table;TemperatureCodeT6T5T4T3Maximum ProcessTemperature+70°C (+158°F)+85°C (+185°F)+120°C (+248°F)+130°C (+266°F)Minimum ProcessTemperature–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)Ambient Temp.: –40°C to +60°C (–40°F to +140°F)T27-1_1.EPS(Remote Flowtube)Explosion proof for Class I, Division 1, Groups A, B, C& D.Dust-ignition proof for Class II/III, Division1, Groups E,F & G.Intrinsically safe (electrodes) for Class I, Division 1,Groups A, B, C & D.“SEAL ALL CONDUITS WITHIN 18 INCHES”“WHEN INSTALLED IN DIV. 2, SEALS NOT REQUIRED”Electrode Circuit Um: 250 Vac/dcExcitation Circuit: 170V maxEnclosure: NEMA 4XTemperature Code: T6Refer to following table;TemperatureCodeT6T5T4T3Maximum ProcessTemperature+70°C (+158°F)+85°C (+185°F)+120°C (+248°F)+150°C (+302°F)Minimum ProcessTemperature–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)Ambient Temp.: –40°C to +60°C (–40°F to +140°F)Note: Installation shall be in accordance with themanufacturer’s instructions and National Electriccode, ANSI/NFPA-70.T28-1_1.EPSAll Rights Reserved. Copyright © 2003, Yokogawa Electric Corporation GS 01E20D01-01E May 10,2006-00
CENELEC ATEX (KEMA):*AXF002C – AXF400CApplicable Standard:EN 50014, EN 50018, EN 50019,EN 50020, EN 50028, EN 50281-1-1,EN 60529, EN 61010-1Certificate: KEMA 03ATEX2435(Integral Flowmeter)CENELEC ATEX (KEMA) Flameproof TypeGroup: IICategory: 2GEEx dme[ia] IIC T6...T3Electrode Circuit Um: 250 Vac/dcMaximum power supply voltage: 250 Vac/130 VdcExcitation Circuit: 140V maxEnclosure: IP66, IP67Temperature Class:TemperatureClassT6T5T4T3Maximum ProcessTemperature+70°C (+158°F)+85°C (+185°F)+120°C (+248°F)+130°C (+266°F)Minimum ProcessTemperature–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)Ambient Temp.: –40°C to +60°C (–40°F to +140°F)T27-2.EPSCENELEC ATEX (KEMA) Type of Protection “Dust”Group: IICategory: 1DElectrode Circuit Um: 250 Vac/dcMaximum power supply voltage: 250 Vac/130 VdcExcitation Circuit: 140V maxEnclosure: IP66, IP67Maximum surface temperature:(Remote Flowtube)CENELEC ATEX (KEMA) Flameproof TypeGroup: IICategory: 2GEEx dme[ia] IIC T6...T3Electrode Circuit Um: 250 Vac/dcExcitation Circuit: 170V maxEnclosure: IP66, IP67Temperature Class:TemperatureClassT6T5T4T3Maximum ProcessTemperature+70°C (+158°F)+85°C (+185°F)+120°C (+248°F)+150°C (+302°F)Minimum ProcessTemperature–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)–40°C (–40°F)Ambient Temp.: –40°C to +60°C (–40°F to +140°F)11T28-2.EPSCENELEC ATEX (KEMA) Type of Protection “Dust”Group: IICategory: 1DElectrode Circuit Um: 250 Vac/dcExcitation Circuit: 170V maxEnclosure: IP66, IP67Maximum surface temperature:Maximum SurfaceTemperatureT75°C (+167°F)T85°C (+185°F)T100°C (+212°F)T115°C (+239°F)Maximum ProcessTemperature+70°C (+158°F)+85°C (+185°F)+120°C (+248°F)+150°C (+302°F)T30.EPSAmbient Temp.: –40°C to +60°C (–40°F to +140°F)Maximum SurfaceTemperatureT75°C (+167°F)T85°C (+185°F)T100°C (+212°F)Maximum ProcessTemperature+70°C (+158°F)+85°C (+185°F)+120°C (+248°F)T110°C (+230°F) +130°C (+266°F)T29.EPSAmbient Temp.: –40°C to +60°C (–40°F to +140°F)All Rights Reserved. Copyright © 2003, Yokogawa Electric Corporation GS 01E20D01-01E May 10,2006-00
Page 1 and 2: GeneralSpecificationsGS 01E20D01-01
Page 3 and 4: Functions “”How to Set Paramete
Page 5 and 6: 5Size of AXF Flowtubes: AXF Standar
Page 7 and 8: Flowtube Material:Size 2.5 mm (0.1
Page 9: 9Gasket:Joints:UseLiningGeneral-Pur
Page 13 and 14: IECEx:*AXF002C - AXF400CApplicable
Page 15 and 16: Polyurethane Rubber /Natural Soft R
Page 17 and 18: ■ NORMAL OPERATING CONDITIONSAmbi
Page 19 and 20: Fluid Temperature and Pressure:Note
Page 21 and 22: Reasonable Figure for Thermal Shock
Page 23 and 24: Size500 (20)600 (24)700 (28)800 (32
Page 25 and 26: 25AXF STANDARD (Wafer /Union Joint
Page 27 and 28: 27AXF STANDARD (Flange Type) Size 5
Page 29 and 30: 29REPLACEMENT MODEL FOR EARLIER ADM
Page 31 and 32: 31■ OPTIONAL SPECIFICATIONS FOR F
Page 33 and 34: 33 Table of Optional Specifications
Page 35 and 36: 35 Table of Optional Specifications
Page 37 and 38: 37■ EXTERNAL DIMENSIONS AXF Stand
Page 39 and 40: 39 AXF Standard, AXF015, Wafer Type
Page 41 and 42: 41 AXF Standard, AXF002-AXF015, JIS
Page 47 and 48: 47 AXF Standard, AXF015-AXF125, San
Page 49 and 50: 49 Replacement model for Earlier AD
Page 51 and 52: 51 Replacement model for Earlier AD
Page 53 and 54: 53 AXF Standard, AXF11L-AXF13L, JIS
Page 55 and 56: 55 Unless otherwise specified, diff

AXF magnetic flowmeter - Istec Corp.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?