AXF magnetic flowmeter - Istec Corp.

General-Purpose Use and Explosion proof Type,Integral flowmeter (electrode structure code 1: Nonreplaceableelectrode)PressureMPa (psi)4 (580)2 (290)2.5 to 50 mm (0.1 to 2.0 in.)80 to 200 mm (3.0 to 8.0 in.)20Natural Soft Rubber LiningGeneral-Purpose Use and Submersible Type,Remote Flowtube (electrode structure code 1: Nonreplaceableelectrode)PressureMPa (psi)4(580)50 mm (2.0 in.) (flange type, wafer type)65 to 200 mm (2.5 to 8.0 in.) (flange type, wafer type)250, 300 mm (10, 12 in.) (flange type)250, 300 mm (10, 12 in.) (wafer type)350, 400 mm (14 , 16 in.) (flange type)–0.1(–14.5)–10 0(14) (32)80 130(175) (266)Temperature °C (°F)180(356)F19-2.EPS*1: For fluid temperature of the explosion proof type,refer to descriptions of “HAZARDOUS AREACLASSIFICATION”.Polyurethane Rubber LiningGeneral-Purpose Use and Submersible Type,Remote Flowtube (electrode structure code 1: Nonreplaceableelectrode)PressureMPa (psi)4 (580)25 to 50 mm (1.0 to 2.0 in.) (flange type, wafer type)65 to 200 mm (2.5 to 8.0 in.) (flange type, wafer type)250, 300 mm (10, 12 in.) (flange type)250, 300 mm (10, 12 in.) (wafer type)350 to 1000 mm (14 to 40 in.) (flange type)1100 to 2600 mm (44 to 104 in.) (flange type)2(290)1(145)*1– 0.05(–7.3)–10 0 40 80(14) (32) (104) (175)Temperature °C (°F)*1 : –0.04 MPa (–5.7 psi) for sizes of 350 mm (14 in.) and 400 mm (16 in.)F05-2.EPSEPDM Rubber LiningGeneral-Purpose Use and Submersible Type,Remote Flowtube (electrode structure code 1: Nonreplaceableelectrode)PressureMPa (psi)4(580)50 mm (2.0 in.) (flange type, wafer type)65 to 200 mm (2.5 to 8.0 in.) (flange type, wafer type)250, 300 mm (10, 12 in.) (flange type)250, 300 mm (10, 12 in.) (wafer type)350, 400 mm (14, 16 in.) (flange type)2 (290)1 (145)0.75(109)–0.1(–14.5)–10 0 40(14) (32) (104)Temperature °C (°F)F20-1.EPSGeneral-Purpose Use, Integral Flowmeter (electrodestructure code 2: replaceable electrode)2(290)1(145)*1– 0.05(–7.3)–10 0 40 80(14) (32) (104) (175)Temperature °C (°F)*1 : –0.04 MPa (–5.7 psi) for sizes of 350 mm (14 in.) and 400 mm (16 in.)F05-3.EPS25 to 200 mm (1.0 to 8.0 in.) (flange type, wafer type)250, 300 mm (10, 12 in.) (flange type)PressureMPa (psi)350, 400 mm (14 , 16 in.) (flange type)250, 300 mm (10 , 12 in.) (wafer type)2 (290)1 (145)–0.1(–14.5)–10 0 40(14) (32) (104)Temperature °C (°F)F20-2.EPSAll Rights Reserved. Copyright © 2003, Yokogawa Electric Corporation GS 01E20D01-01E May 10,2006-00