AXF magnetic flowmeter - Istec Corp.

More documents

Recommendations

Info

32 Table of Optional Specifications (Size 2.5 mm (0.1 in.) to 400 mm (16 in.)) (continued)ItemG3/4 FemaleWaterproof GlandsWaterproof GlandsWaterproof Glandswith Union JointsPlastic GlandsMirror Finished PFALiningMirror FinishedCeramicsStainless Steel TagPlateSpecificationsWaterproof glands for G3/4 conduits or flexible tubes are attached to theelectrical connections. Available only for JIS G1/2 electric connections.Waterproof glands are attached to the electrical connections. Availableonly for JIS G1/2 electric connections.Waterproof glands with union joints are attached to the electricalconnections. Available only for JIS G1/2 electric connections.Plastic glands are attached to the electrical connections. Available only forJIS G1/2 electric connections.Mirror finishing on the PFA lining inside of the tube to the smoothness lying.Available for 15 mm (0.5 in.) and larger sizes.The Ra is average of measured values on several point.Size 15 to 200 mm (0.5 to 8.0 in.) : Ra 0.05 to 0.15 µmSize 250 to 400 mm (10 to 16 in.) : Ra 0.05 to 0.25 µmMirror finishing on the inside of the ceramics tube to Rmax 1 µm.Available for 5 mm (0.2 in.) and larger sizes.A pendant tag plate of JIS SUS304 (AISI 304 SS/EN 1.4301 equivalent) isprovided. Choose this option when a pendant tag plate is required inaddition to the standard nameplate with the tag number inscribed on it.Dimension (Height Width): Appr. 12.5 (4.92) 40 (15.7) mm (inch)AXF***G-DAXF***G-EGeneralIntegralFlowmeterRemoteFlowtubeAXF***G-NAXF***G-P: Available –: Not availableApplicable ModelExplosion proof Submersible SanitaryIntegralFlowmeterAXF***C-DAXF***C-ERemoteFlowtubeAXF***C-NAXF***C-PRemoteFlowtubeAXF***W-NAXF***W-PIntegralFlowmeterAXF***H-DAXF***H-ERemoteFlowtubeAXF***H-NAXF***H-PCode– – – – – EW – – – EG – – – EU – – – EP PM – – – CM SCTDirection change ofthe electricalconnection (*1)Bolts, Nuts, andGaskets (*2)Special Gaskets (*3)Oil-prohibited Use90 degrees rotated converter (or terminal box) to change the direction ofthe electrical connection.180 degrees rotated converter (or terminal box) to change the direction ofthe electrical connection.90 degrees rotated converter (or terminal box) to change the direction ofthe electrical connection.Bolts, nuts, and Bolts and nuts: Carbon steel; Gaskets: Chloroprenegaskets are rubberprovided for wafer Bolts and nuts: Carbon steel; Gaskets: PTFE-sheathedconnections. non-asbestosAvailable only for Bolts: JIS SUS304 (AISI 304 SS stainless steelANSI 150, JIS10K, equivalent);or, JIS20K wafer Nuts: JIS SUS403 (AISI 403SS stainless steelconnections. equivalent) ;Gaskets: Chloroprene rubberBolts: JIS SUS304 (AISI 304 SS stainless steelequivalent);Nuts: JIS SUS403 (AISI 403SS stainless steelequivalent) ;Gaskets: PTFE-sheathed non-asbestosViton® gaskets for use with a PFA or ceramics lining with PVC piping.Valqua #4010, special fluororubber not mixed. Available for 2.5 mm (0.1 in.)to 200 mm (8.0 in.) of PFA lining or 15 to 200 mm (0.5 to 8 in.) sizes ofceramics lining.Acid-resistant Viton® gaskets for use with a PFA or ceramics lining withPVC piping. Valqua #4010, special fluororubber mixed (mixing #RCD470).Available for 2.5 mm (0.1 in.) to 200 mm (8.0 in.) of PFA lining or 15 to 200mm (0.5 to 8 in.) sizes of ceramics lining.Alkali-resistant Viton® gaskets for use with a PFA or ceramics lining withPVC piping. Valqua #4010, special fluororubber mixed (mixing #RCD970).Available for 2.5 mm (0.1 in.) to 200 mm (8.0 in.) of PFA lining or 15 to 200mm (0.5 to 8 in.) sizes of ceramics lining.Alkali-resistant carbonized fluororesin gaskets for use with a ceramicslining with metal piping. Valqua #7026.Silicon rubber gaskets for Sanitary Type, provided between the lining andthe adapter. For the condition of fluid temp. 120 to 160°C (248 to 320°F).Electrodes, linings, and grounding rings are assembled and packed withpolyethylene after being cleaned with water and acetone and dried with air.The label ‘OIL FREE’ is affixed. RA RB RC – – BCC – – BCF – – BSC – – BSF – – GA – – GC – – GD – – – GF– – – – – GH – – – K1T26-2.EPSAll Rights Reserved. Copyright © 2003, Yokogawa Electric Corporation GS 01E20D01-01E May 10,2006-00
33 Table of Optional Specifications (Size 2.5 mm (0.1 in.) to 400 mm (16 in.)) (continued)Applicable Model: Available –: Not availableGeneralExplosion proofSubmersibleSanitaryItemSpecificationsIntegralFlowmeterRemoteFlowtubeIntegralFlowwmeterRemoteFlowtubeRemoteFlowtubeIntegralFlowmeterRemoteFlowtubeCodeAXF***G-DAXF***G-EAXF***G-NAXF***G-PAXF***C-DAXF***C-EAXF***C-NAXF***C-PAXF***W-NAXF***W-PAXF***H-DAXF***H-EAXF***H-NAXF***H-POil-prohibited Use withDehydrating TreatmentPainting Color ChangeEpoxy Resin CoatingHigh Anti-corrosionCoatingMaterial CertificateHydrostatic TestCalibration CertificateVent HoleEnhanced DualFrequency Excitation(*4)Electrodes, linings, and grounding rings are assembled and packed withpolyethylene including desiccants after being cleaned with water andacetone and dried with air. The label ‘OIL & WATER FREE’ is affixed.Coated in black (Munsell N1.5 or its equivalent.)Coated in jade green (Munsell 7.5 BG 4/1.5 or its equivalent.)Coated in metallic silver.Epoxy resin coating which has alkali-resistance instead of standardpolyurethane resin coating. The color is same as standard type.Three-layer coating (polyurethane coating on two-layer epoxy resincoating) in the same range as that for the standard coating. The color issame as standard type. Salt/alkali/acid/weather-resistance.Reproduced material certificates for :PFA/polyurethane: Pipe, electrodes, grounding rings/groundingelectrodes, flanges or mini flanges, adapters (for sanitary type)Ceramics: only grounding rings or grounding electrodesThe test verifies the absence of leaks by applying the following waterpressures (which are determined under process connection conditions) tolinings for ten minutes. Test results are described in the Note column of atest certificate (QIC).Process Connection:Water Pressure:ANSI Class 150, DIN PN10, JIS 10K1.5 MPaANSI Class 300, DIN PN16, JIS 20K3.0 MPaDIN PN40, Union joint (Ceramics lining)6.0 MPaJIS F121.25 MPaLevel 2: The Declaration and the Calibration Equipment List are issued.Level 3: The Declaration and the Primary Standard List are issued.Level 4: The Declaration and the Yokogawa Measuring Instruments ControlSystem are issued.With a vent hole provided for permeable fluids (such as nitric acid,hydrofluoric acid, or sodium hydroxide at high temperature).Available only for a PFA lining flange type tube.Available for 25 to 200 mm (1.0 to 8.0 in.) sizes.Products are delivered with the Standard dual frequency excitation modeand the Enhanced dual frequency excitation mode enabled.As flow calibration is not performed for optional code HF1 while inEnhanced dual frequency excitation. Excitation mode select optional codeHF2 when an accurate flow measurement is required.Available for 25 to 200 mm (1.0 to 8.0 in.) sizes.Products are delivered with the Standard dual frequency excitation modeand the Enhanced dual frequency excitation mode enabled.The meter factor for the Enhanced dual frequency excitation obtained byflow calibration is inscribed on the nameplate and set into the combinedconverter in addition to the meter factor for the Standard dual frequencyexcitation. – – – K5 – P1 – P2 – P7 – – – X1 – – – X2 M01 – – T01 L2 L3 L4 – – – H HF1 HF2T26-3.EPSAll Rights Reserved. Copyright © 2003, Yokogawa Electric Corporation GS 01E20D01-01E May 10,2006-00
Page 1 and 2: GeneralSpecificationsGS 01E20D01-01
Page 3 and 4: Functions “”How to Set Paramete
Page 5 and 6: 5Size of AXF Flowtubes: AXF Standar
Page 7 and 8: Flowtube Material:Size 2.5 mm (0.1
Page 9 and 10: 9Gasket:Joints:UseLiningGeneral-Pur
Page 11 and 12: CENELEC ATEX (KEMA):*AXF002C - AXF4
Page 13 and 14: IECEx:*AXF002C - AXF400CApplicable
Page 15 and 16: Polyurethane Rubber /Natural Soft R
Page 17 and 18: ■ NORMAL OPERATING CONDITIONSAmbi
Page 19 and 20: Fluid Temperature and Pressure:Note
Page 21 and 22: Reasonable Figure for Thermal Shock
Page 23 and 24: Size500 (20)600 (24)700 (28)800 (32
Page 25 and 26: 25AXF STANDARD (Wafer /Union Joint
Page 27 and 28: 27AXF STANDARD (Flange Type) Size 5
Page 29 and 30: 29REPLACEMENT MODEL FOR EARLIER ADM
Page 31: 31■ OPTIONAL SPECIFICATIONS FOR F
Page 35 and 36: 35 Table of Optional Specifications
Page 37 and 38: 37■ EXTERNAL DIMENSIONS AXF Stand
Page 39 and 40: 39 AXF Standard, AXF015, Wafer Type
Page 41 and 42: 41 AXF Standard, AXF002-AXF015, JIS
Page 47 and 48: 47 AXF Standard, AXF015-AXF125, San
Page 49 and 50: 49 Replacement model for Earlier AD
Page 51 and 52: 51 Replacement model for Earlier AD
Page 53 and 54: 53 AXF Standard, AXF11L-AXF13L, JIS
Page 55 and 56: 55 Unless otherwise specified, diff

AXF magnetic flowmeter - Istec Corp.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?