AXF magnetic flowmeter - Istec Corp.

56ORDERING INFORMATION “”Note 1: When ordering a remote flowtube and a remoteconverter, specify the flow span, unit, pulse weight,and totalizer display pulse weight for the orderdetails of the flowtube.Then these parameters will then be set in thecombined converter before shipment.Note 2: Some options, if ordered, require the relevantspecifications to be input when ordering.1. Model, specification and option codes.2. Converter for combined use (when ordering a remoteflowtube)Model, suffix code, optional code, and tag number (ifspecified) of a converter for combined use.Refer to “ORDERING INFORMATION” of GS01E20C01-01E, GS 01E20C02-01.3. Tag numberEach tag number can be specified in up to 16characters in a combination of letters (capital or smallletters), numbers, “-” and “.”.For HART protocol, up to 8 characters can be specified.If specified, the tag number is inscribed on the product’sname plate and tag plate (if optional code SCT isselected). If the product is an integral flowmeter, the tagnumber is also set into the memory of its converter.If the user wishes to change only the tag number to beset into a converter’s memory, specify the software tag.If a tag number is not specified, the tag number is setas a blank.4. Flow rate spans and unitsFlow span can be specified the numeric within the valueof 0.0001 to 32000.And it can be up to five digits, to a maximum of 32000ignoring the decimal point.And a fraction is limited to the fourth decimal place.Integral flowmeter are set to the first range in theforward direction. Remote flowtube are set to the firstrange in the forward direction of the converter (AXFA11or AXFA14) with which they are to be combined.If a flow rate span and its unit are not specified, therelevant product is delivered with the setting at 1 m/s(3.3 ft/s).5. Output pulse weightIf specified, volume per pulse shall be set. Unlessspecified, the relevant product is delivered with thesetting at 0 pulse/second.6. Totalizer display pulse weightIf specified, volume per pulse shall be set. Unlessspecified, the relevant product is delivered with thesetting at 0 pulse/second.7. Fluid nameRELATED INSTRUMENTSCalibrator for Magnetic Flowmeter (AM012):GS 01E06K02-00EBT200 Brain Terminal: GS 1C0A11-EAXFA11G Magnetic Flowmeter Remote Converter:GS 01E20C01-01EAXFA14G/C Magnetic Flowmeter Remote Converter:GS 01E20C02-01EAll Rights Reserved. Copyright © 2003, Yokogawa Electric CorporationSubject to change without notice.GS 01E20D01-01E May 10,2006-00