uPD789074 Subseries 8-Bit Single-Chip Microcontrollers UD - Home

CHAPTER 16 ELECTRICAL SPECIFICATIONS (CONVENTIONAL PRODUCTS)DC Characteristics (TA = −40 to +85°C, VDD = 1.8 to 5.5 V)Parameter Symbol Conditions MIN. TYP. MAX. UnitOutput current,highOutput current, lowInput voltage, highInput voltage, lowOutput voltage,highIOH Per pin µPD78907x, 78F9076−1 mAIOLTotal for all pinsPer pin µPD78907x(A)−1 mATotal for all pinsPer pin µPD78907x, 78F907610 mATotal for all pins−15−11mAmA80 mAPer pin µPD78907x(A)3 mATotal for all pins60 mAVIH1 P00 to P07, P10 to P15, VDD = 2.7 to 5.5 V 0.7VDD VDD VP30, P31 VDD = 1.8 to 5.5 V 0.9VDD VDD VVIH2 RESET, P20 to P27 VDD = 2.7 to 5.5 V 0.8VDD VDD VVIH3X1, X2VDD = 1.8 to 5.5 V 0.9VDD VDD VVDD = 4.5 to 5.5 V VDD − 0.5 VDD VVDD = 1.8 to 5.5 V VDD − 0.1 VDD VVIL1 P00 to P07, P10 to P15, VDD = 2.7 to 5.5 V 0 0.3VDD VP30, P31 VDD = 1.8 to 5.5 V 0 0.1VDD VVIL2 RESET, P20 to P27 VDD = 2.7 to 5.5 V 0 0.2VDD VVDD = 1.8 to 5.5 V 0 0.1VDD VVIL3 X1, X2VDD = 4.5 to 5.5 V 0 0.4 VVOHVDD = 1.8 to 5.5 V 0 0.1 VVDD = 4.5 to 5.5 V, IOH = −1 mA VDD − 1.0 VVDD = 1.8 to 5.5 V, IOH = −100 µA VDD − 0.5 VOutput voltage, lowVOLVDD = 4.5 to 5.5 V, IOL = 10 mA(µPD78907x,78F9076)1.0 VVDD = 4.5 to 5.5 V, IOL = 3 mA (µPD78907x(A)) 1.0 VVDD = 1.8 to 5.5 V, IOL = 400 µA 0.5 VInput leakagecurrent, highInput leakagecurrent, lowOutput leakagecurrent, highOutput leakagecurrent, lowSoftware pull-upresistorILIH1 VIN = VDD Pins other than X1,X23 µAILIH2 X1, X2 20 µAILIL1 VIN = 0 VPins other than X1,X2ILIL2−3 µAX1, X2 −20 µAILOH VOUT = VDD 3 µAILOL VOUT = 0 V −3 µAR1 VIN = 0 V 50 100 200 kΩRemark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of portpins.User’s Manual U14801EJ3V1UD 213