StreamPro ADCP Operation Manual - global site

StreamPro ADCP Operation ManualTap this Xto exit!Figure 23.Feature Enable Programg. Wait for the Long Range Option Enabled message (see Figure 23).Click OK to continue.h. Click the X button to exit the SPActivate program. Make sure to clickthe X, not the white circle with the X (this only minimizes the program).If SPActivate is not exited, the COM port will be still in use and notavailable for use with the StreamPro software.i. Start the StreamPro program and test the communications between theiPAQ and StreamPro ADCP. If you have problems, do a soft reset onthe iPAQ and try again.P/N 95B-6003-00 (February 2008) page 43