StreamPro ADCP Operation Manual - global site

StreamPro ADCP Operation ManualCS – Start Pinging (Go)Purpose Starts the data collection cycle.Format CSRecommended Setting. Use as needed. Use WinRiver to create thecommand file. The CS command will be added to the end of the commandfile or sent by the software.DescriptionUse CS to tell the StreamPro to start pinging its transducersand collecting data as programmed by the other commands.NOTE. After a CS-command is sent to the StreamPro, no changes to thecommands can occur until a = = = is sent.page 46Teledyne RD Instruments