User ManUal - FlowVision GmbH

FC100-CA | Flow Meteroperating systemGMBHMenu pagingThe next menu option is selected by pressing M MODE (forward paging).Calling a menu optionSimultaneously pressing UP and DOWN = + calls the selected menu option or causesskipping to the selected submenu.Entry of numeralsSome menu options require numerical values to be entered. After selecting the appropriate menuoption, the value indicated can be changed by pressing UP or DOWN.Each time UP or DOWN are pressed, the value indicated will be increased and reducedrespectively, by one numeral skip.The longer UP or DOWN are pressed, the faster the increase or reduction.Transfer of entriesPressing M MODE transfers the set value or the selected menu option to a volatile memory.A permanent transfer of settings and values is only effected when quitting the menu, after a plausibilitycheck of all entries.Afterwards the data are still available even after repeatedly switching the FC100-CA ON/OFF.Deleting dataSelected data such as MIN or MAX values can be deleted or reset by simultaneously pressing UP and DOWN = + .35