User ManUal - FlowVision GmbH

GMBHFlow Meter | FC100-CAConfiguration5.10 Limit switchessubmenulimit switchesMback toConfigurationmenuLimit switchesLS1→F LS2→TorMLS1on = 0,00m/s0.0 m 3 /hMLS1off = 3,00m/s5.3 m 3 /hMLS2on valueLS2on =-40.0°CMLS2off valueLS2off = 130.0°CMLimit switchesLS1→T LS2→TorMLS1oN valueLS1oN = 105.0°CMLS1off valueLS1off = 100.0°CMLS2on valueLS2oN = 102.0°CMLS2off valueLS2off = 108.5°CMLimit switchesLS1→F LS2→ForMLS1oN = 0,00m/s0.0 m 3 /hMLS1off = 3,00m/s5.3 m 3 /hMLS2on = 1.50 m/s2.7 m 3 /hMLS2off = 0.50 m/s0.9 m 3 /hMLimit switchesLS1→T LS2→ForMLS1oN valueLS1oN = 20.3°CMLS1off valueLS1off = 45.5°CMLS2ON = 0.90 m/s1.6 m 3 /hMLS2OFF = 1.50 m/s2.3 m 3 /hMfig. 40The FC100-CA comprises two limit switches (LS1 and LS2) which are assigned to the physicalquantity/quantities to be monitored in submenu LIMIT SWITCHES (see fig. 40).The following combinations are available:54• LS1 → F and LS2 → Tlimit switch 1 →limit switch 2 →• LS1 → T and LS2 → Tlimit switch 1 →limit switch 2 →• LS1 → F and LS2 → Flimit switch 1 →limit switch 2 →• LS1 → T and LS2 → Flimit switch 1 →limit switch 2 →flow velocitymedium temperaturemedium temperaturemedium temperatureflow velocityflow velocitymedium temperatureflow velocityMode of operation, limit value and hysteresis of the limit switches are determined by the switch-onand switch-off values of LS1 and LS2 (see chapter 5.10.1).