User ManUal - FlowVision GmbH

FC100-CA | Flow MeterAppendixGMBHAppendixAppendix 1 - Performance of the digital and analogue outputs during the operating and error modesDuty/Error statusStart-up (Reset)Start-up test activeError No. 1Error No. 2Error No. 3Error No. 4Error No. 5Heating period activeLIMITSWITCH 1ONOFFOFFOFFOFFOFFOFFOFFLIMITSWITCH 2ONOFFOFFOFFOFFOFFOFFOFFNO ERRORONOFFOFFOFFOFFOFFOFFONNOT BUSY/FREQUENCYOUTPUTONOFFOFFOFFOFFOFFOFFOFFANA OUTFLOWMAXMINMINMINMINMINMINMINANA OUTTEMPMAXMINMINMINMINMINMINMINNormal operation XXON ONXXConfiguration activeError No. 10Error No. 20Error No. 21Error No. 30Error No. 60*Error No. 40Error No. 41OFFOFFXOFFXXXXOFFOFFXOFFXXXXONOFFOFFOFFOFFOFFYYOFFOFFONOFFONFAONONFREEZEMINXMINXXXXFREEZEMINXMINXXXXX = standard performanceY = OFF pulseFA = frequency output 10 HzFREEZE = the last output value before error occurred will be retained* When frequency output has been selected.Note: The occurence of error No. 40/41 will alwayscause an internal resetStatus of the outputs prior to the error status described→ see start-up (reset)71