Aspire PCPro/WebPro Installation Manual - Support - NEC Unified ...

More documents

Recommendations

Info

Connecting to the System - USB ConnectionConnecting to the System - USB ConnectionUSB Connection (Aspire Only)When the USB port is used to connect to the Aspire system, an NEC USB driver must be installed. Use the steps below toinstall the USB driver.The graphics shown below are with Windows XP. When using Windows 2000, there may be some differences.1. Insert the disk containing the NEC USB driver into your PC.2. Connect the Aspire system to the PC using a USB cable.3. Windows notifies you of new hardware found. Open the Hardware Wizard window to begin the setup.4. The software locates the USB driver file on the disk and begins the installation.Depending on your software, the next screen may ask you to check which drives should be searched for theUSB driver.5. When the following window appears, click CONTINUE ANYWAY.16 ◆
6. The software continues the installation process.Connecting to the System - USB Connection7. Once the software is installed, click FINISH.8. The PC must then be restarted in order for the USB port to work.◆ 17
Page 2 and 3: This manual has been developed by N
Page 4 and 5: Using PCPro . . . . . . . . . . . .
Page 7 and 8: Aspire Software and PCPro Compatibi
Page 9 and 10: Connecting to the Aspire S/Aspire S
Page 11 and 12: Connecting to the Aspire S/Aspire S
Page 13 and 14: Installing PCPro6. Change the insta
Page 15 and 16: Connecting to the System - Remote M
Page 17 and 18: Connecting to the System - Remote M
Page 19: Connecting to the System - Local Se
Page 23 and 24: Connecting to the System - LAN (Eth
Page 25 and 26: Connecting to the System - LAN (Eth
Page 27 and 28: Creating a Dial Up SettingCreating
Page 29 and 30: 6. The DIAL-UP CONNECTION bullet sh
Page 31 and 32: Direct Dial Up (direct serial cable
Page 33 and 34: Creating a Dial Up Setting10. Windo
Page 35 and 36: Creating a Dial Up SettingDirect Di
Page 37 and 38: Creating a Dial Up Setting10. Windo
Page 39 and 40: Creating a Dial Up SettingCompletin
Page 41 and 42: Creating a Dial Up Setting7. In the
Page 43 and 44: Creating a Dial Up Setting12. Click
Page 45 and 46: Creating a Dial Up Setting20. Selec
Page 47 and 48: Using PCProUsing PCProUsing PCProSe
Page 49 and 50: Using PCProUsing PCProTo create a n
Page 51 and 52: Using WebProUsing WebProUsing WebPr
Page 53 and 54: Using WebPro8. Once the User Name a
Page 55 and 56: PCPro/WebPro FeaturesPCPro/WebPro F
Page 57 and 58: PCPro/WebPro FeaturesProgrammingSys
Page 59 and 60: PCPro/WebPro FeaturesOtherHelpClick
Page 61 and 62: Troubleshooting Your ConnectionTrou
Page 63 and 64: Troubleshooting Your Connection13.
Page 65 and 66: NEC Unified Solutions, Inc.4 Forest

Aspire PCPro/WebPro Installation Manual - Support - NEC Unified ...

Create successful ePaper yourself

Delete template?

Save as template?