Altistart 22 - Schneider Electric

More documents

Recommendations

Info

Dimensions and weightsATS22C21 to C59For frame sizes C21 to C59, the fan is integrated.ATS22C21C25C32C41FramesizeDDDDa b c e H G1 P Q Q1 S D1 D2 Weightmm(in.)206(8.1)mm(in.)425(16.7)mm(in.)299(11.8)mm(in.)15(0.59)mm(in.)396(15.6)mm(in.)157(6.2)mm(in.)60(2.4)mm(in.)40(1.6)mm(in.)1.3(0.05)mm(in.)30(1.2)mm(in.)13.5(0.53)mm(in.)9(0.35)kg (lb)20.5(45.2)C48 E 304C59 E (11.9)455(17.9)339.7(13.4)15(0.59)426(16.8)264(10.4)94(3.7)55(2.2)1(0.04)40(1.6)13.5(0.53)9(0.35)33(73.3)16 BBV51330 08/2012
MountingMounting PrecautionsFollow these precautions when mounting the ATS22 soft starter:• The soft starter is compliant with pollution Degree 2 as defined in NEMA ICS1-1 or IEC 60664-1.• For environment pollution degree 3 install the product inside a cabinet type 12 or IP54.DANGERHAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASHATS22 soft starters are open devices and must be mounted in a suitable enclosure.Failure to follow these instructions will result in death or serious injury.• The ATS22 soft starter generates heat and must be properly ventilated. Refer to "Thermal considerations for sizing enclosures” page19 to determine power dissipated.• When several soft starters are installed in a control panel, arrange them in a row. Do not stack soft starters. Heat generated from thebottom soft starter can adversely affect the ambient temperature around the top soft starter.• Install the ATS22 vertically, within ± 10° (other positions are not allowed).• Do not place it close to heating elements. Leave sufficient free space so that the air required for cooling purposes can circulate fromthe bottom to the top of the unit.• Electrical current through the ATS22 will result in heat losses that must be dissipated into the ambient air immediately surroundingthe soft starter. To help prevent a thermal fault, provide sufficient enclosure cooling and/or ventilation to limit the ambient temperaturearound the soft starter.S ≥ 100 mm (3.9 in)Note: For the soft starters mounted side-by-side, the free spacemust be ≥ 50 mm (1.95 in.)S ≥ 50 mm(1.95 in.)S ≥ 50 mm(1.95 in.)S ≥ 100 mm (3.9 in)DANGERHAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASHCheck that no liquid, dust or conductive object can fall into the soft starter (degree of protection IP00 from above).Failure to follow these instructions will result in death or serious injury.BBV51330 08/2012 17
Page 1: 2354235 11/2008Altistart 22Soft sta
Page 6 and 7: Documentation structureThe followin
Page 8 and 9: Receiving and handlingIntroductionT
Page 10 and 11: SelectionTorque characteristicTs an
Page 12 and 13: SelectionStandard application, Alti
Page 14 and 15: Dimensions and weightsATS22D17 to D
Page 18 and 19: MountingSoft starter ventilationOn
Page 20 and 21: Mounting - Fan optionFan for frame
Page 22 and 23: Thermal protectionSoft starter ther
Page 24 and 25: Thermal protectionWarm curvest (s)C
Page 26 and 27: WiringInstallation PrecautionsDANGE
Page 28 and 29: WiringRefer to application diagrams
Page 30 and 31: WiringThe ATS22pppQ range (230-440
Page 32 and 33: Wiring - power terminalsPowerObserv
Page 34 and 35: Wiring - power terminalsPower conne
Page 36 and 37: Wiring - control terminalsElectrica
Page 38 and 39: Wiring - in line connection - appli
Page 40 and 41: Wiring - in line connection - appli
Page 42 and 43: Display terminalFunctions of the ke
Page 44 and 45: Remote keypad display - optionThe V
Page 46 and 47: ProgrammingMenu structureTwo menu l
Page 48 and 49: List of parametersParameters access
Page 50 and 51: Configuration menu (ConF)conFCode N
Page 52 and 53: Settings menu (SEt)Code Name/Descri
Page 54 and 55: Advanced adjustments menu (AdJ)Code
Page 56 and 57: Advanced protections menu (PrO)Code
Page 58 and 59: Advanced protections menu (PrO)Code
Page 60 and 61: Advanced IO menu (IO)Code Name/Desc
Page 62 and 63: Advanced communication menu (COP)Co
Page 64 and 65: Utility menu (UtIL)Code Name/Descri
Page 66 and 67:
Command channelBehavior on channel
Page 68 and 69:
Modbus FunctionThis section describ
Page 70 and 71:
Modbus FunctionWrite one output wor
Page 72 and 73:
Modbus FunctionError managementExce
Page 74 and 75:
MaintenanceServicingIt is advisable
Page 76 and 77:
Diagnostics / TroubleshootingTrip c
Page 78 and 79:
Parameter Index and Modbus addresse
Page 80 and 81:
Parameter Index and Modbus addresse
Page 82 and 83:
Annex 1: UL508 schematicsATS22•
Page 84 and 85:
84 BBV51330 08/2012
show all

Altistart 22 - Schneider Electric

Create successful ePaper yourself

Delete template?

Save as template?